I am going to build a P3A/P10 biamped system with a linkwitz-riley active crossover, with a preamp that was blown by a penny.
The output transistors for the P3A are some 2sc3181's and 2sa1364's,with 2sc4793 an 2sa1837 for drivers.
the P10 is undecided on output transistors.
I have a 24-0-24 tranny, giving +/-32v rails, and an MOT, 1.8KVA, 2400VAC
, that I can rewind to yield +/-anything I want. The 24-0-24 came from a Sony STR VX200. it is NOT toroidal, but it doen't matter in a steel case, seperate from the amp.
What kind of power(VA) would I need for this sort of system?
keep in mind I want to buy as little as possible, and can get alot of stuff from my junk box.
Jake
The output transistors for the P3A are some 2sc3181's and 2sa1364's,with 2sc4793 an 2sa1837 for drivers.
the P10 is undecided on output transistors.
I have a 24-0-24 tranny, giving +/-32v rails, and an MOT, 1.8KVA, 2400VAC
, that I can rewind to yield +/-anything I want. The 24-0-24 came from a Sony STR VX200. it is NOT toroidal, but it doen't matter in a steel case, seperate from the amp.What kind of power(VA) would I need for this sort of system?
keep in mind I want to buy as little as possible, and can get alot of stuff from my junk box.
Jake