a/d/s pq20 question

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
M

mike49504

Member
Joined 2006
Im working on a a/d/s pq20 amp i repaired the power supply in it but there is 2 yellow thermisters in the circuit without them the amp dose nothing i measured them with my multimeter and it reads 0.38 ohms when cold wondering if anyone knows what i can replace them with and were i can get them any help would be appericated thanks
 
1

1moreamp

Member
Joined 2005
I have never seen these broken. Perhaps if the wires are broken at the yellow body you can shave the coating back ans solder flexible wires to the wire stubs and then place the device back in service.

Due to age I know of no source for these, perhaps if you could find a PQ-15 or 20 thats just parts then maybe spares could be had....Good luck:)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom