yea i know,,i wont add any or improvise what apex made, i respect his masterpiece
those reserve trans is for the 4 channel h900,, now im printing pcb
those reserve trans is for the 4 channel h900,, now im printing pcb
how did you test 1200?
5200/1943 on driver board is not an output stage it is in driver stage
5200/1943 on driver board is not an output stage it is in driver stage
happy holiday buddy,
enjoy what you are doing(i know you already is)
you have plenty of materials now
God bless
enjoy what you are doing(i know you already is)
you have plenty of materials now
God bless
apex,
from irf540
irf2807 is better,
how to determine a better fet?
by ampere?
by rds on?
volt?
how abot mtp50n06e,
125w,60v,,0.025R,50a
from irf540
irf2807 is better,
how to determine a better fet?
by ampere?
by rds on?
volt?
how abot mtp50n06e,
125w,60v,,0.025R,50a
@irvynejay how's your dc offset and bias messurement?Happy holidays to all
2Channel of H900 is now fired up and Great HiFi sounds
next action install Apex Protect circuit and the right Trapo to check Heat and power
TY MILE!!
regards
hi andrewlebon sekhar,aman,sudhir
what are you paying for c5200/1943 pair
iam getting 75 rs for a pair original toshiba
reards
ravs
be a vegeterian.....
what are you paying for c5200/1943 pair
iam getting 75 rs for a pair original toshiba
reards
ravs
be a vegeterian.....
hi ravslanka
greetings check KHANDELWAL ELECTRONICS 62 RS A PAIR OF
ST ELECTRONICS ORIGNAL
THANKING YOU
ANDREW LEBON
greetings check KHANDELWAL ELECTRONICS 62 RS A PAIR OF
ST ELECTRONICS ORIGNAL
THANKING YOU
ANDREW LEBON
hi andrew,
what is the shop no in lr market.hi aman you want the shop no ill tell you.they are original
toshibas i have checked connecting to amp rated at 100 watts
regards
ravs
be a vegeterian.....
what is the shop no in lr market.hi aman you want the shop no ill tell you.they are original
toshibas i have checked connecting to amp rated at 100 watts
regards
ravs
be a vegeterian.....
hi apexaudio
greetings and a HAPPY NEW YEAR PROSPERITY AND GOOD HEALTH
to you THANK YOU FOR ALL THE WONDERFUL SCHEMATICS AND GUIDANCE
how can vertex 3 step be connected to H900 you said there are some modifications this time tracks are thicker using MUR 1660 but have MUR3060
will change after testing step driver
thanking you
andrew lebon
greetings and a HAPPY NEW YEAR PROSPERITY AND GOOD HEALTH
to you THANK YOU FOR ALL THE WONDERFUL SCHEMATICS AND GUIDANCE
how can vertex 3 step be connected to H900 you said there are some modifications this time tracks are thicker using MUR 1660 but have MUR3060
will change after testing step driver
thanking you
andrew lebon
Attachments
hello my fellow filipino diy'r
can somebody gave local store name reputable of selling genuine parts,
FARNELL & RS
any local store name,
how about ALEXAN?
can somebody gave local store name reputable of selling genuine parts,
FARNELL & RS
any local store name,
how about ALEXAN?
already bout there sir,
60p/pc.
but,
i don't think so,
check farnell
TOSHIBA|2SC5200-0|TRANSISTOR, NPN, 2-21F1A | element14 Philippines
60p/pc.
but,
i don't think so,
check farnell
TOSHIBA|2SC5200-0|TRANSISTOR, NPN, 2-21F1A | element14 Philippines
- Home
- Amplifiers
- Solid State
- 900W H-class PA Amp with Limiter