The following is the tube model of 75 for TINA simulator.
I am not familiar with LTSPICE. I hear TINA's model can be
used for LTSPICE.
------------------------------------------------------------------
* Generic triode model: 75
* Copyright 2003--2008 by Ayumi Nakabayashi, All rights reserved.
* Version 3.10, Generated on Sat Mar 8 22:41:46 2008
* Plate
* | Grid
* | | Cathode
* | | |
.SUBCKT 75 A G K
.PARAM X1=0.62861222 X2=0.0015984063 X3=-0.25776155
.PARAM X4=0.85335807 X5=91.742588 X6=1.7577615
.PARAM X7=0.00073974709 X8=107.50773 X9=0.00046981663
.PARAM Y1=0.00036987355 Y2=0.00038021882
BK IK 0 V=U(V(G,K)+X1)*X7*URAMP(V(G,K)+X1+URAMP(V(A,K))/X8)^1.5+(1-U(V(G,K)+X1))*X9*(X2*URAMP(V(A,K)))^X3*(X4*URAMP(V(G,K)+X1+URAMP(V(A,K))/X5))^X6
BA A K I=URAMP((Y2*URAMP(V(A,K))^1.5)-URAMP((Y2*URAMP(V(A,K))^1.5)-V(IK)+Y1*URAMP(V(G,K))^1.5*(URAMP(V(G,K))/(URAMP(V(A,K))+URAMP(V(G,K)))*1.2+.4)))+1E-10*V(A,K)
BG G K I=Y1*URAMP(V(G,K))^1.5*(URAMP(V(G,K))/(URAMP(V(A,K))+URAMP(V(G,K)))*1.2+.4)
* CAPS
CGA G A 1.7p
CGK G K 1.7p
CAK A K 3.8p
.ENDS
*
----------------------------------------------------------------------------
I am not familiar with LTSPICE. I hear TINA's model can be
used for LTSPICE.
------------------------------------------------------------------
* Generic triode model: 75
* Copyright 2003--2008 by Ayumi Nakabayashi, All rights reserved.
* Version 3.10, Generated on Sat Mar 8 22:41:46 2008
* Plate
* | Grid
* | | Cathode
* | | |
.SUBCKT 75 A G K
.PARAM X1=0.62861222 X2=0.0015984063 X3=-0.25776155
.PARAM X4=0.85335807 X5=91.742588 X6=1.7577615
.PARAM X7=0.00073974709 X8=107.50773 X9=0.00046981663
.PARAM Y1=0.00036987355 Y2=0.00038021882
BK IK 0 V=U(V(G,K)+X1)*X7*URAMP(V(G,K)+X1+URAMP(V(A,K))/X8)^1.5+(1-U(V(G,K)+X1))*X9*(X2*URAMP(V(A,K)))^X3*(X4*URAMP(V(G,K)+X1+URAMP(V(A,K))/X5))^X6
BA A K I=URAMP((Y2*URAMP(V(A,K))^1.5)-URAMP((Y2*URAMP(V(A,K))^1.5)-V(IK)+Y1*URAMP(V(G,K))^1.5*(URAMP(V(G,K))/(URAMP(V(A,K))+URAMP(V(G,K)))*1.2+.4)))+1E-10*V(A,K)
BG G K I=Y1*URAMP(V(G,K))^1.5*(URAMP(V(G,K))/(URAMP(V(A,K))+URAMP(V(G,K)))*1.2+.4)
* CAPS
CGA G A 1.7p
CGK G K 1.7p
CAK A K 3.8p
.ENDS
*
----------------------------------------------------------------------------
Thank you,
I also found that 75 = 2A6 = 6SQ7 (except for Max plate voltages_
Will use 6SQ7 models.
I also found that 75 = 2A6 = 6SQ7 (except for Max plate voltages_
Will use 6SQ7 models.
Coldcathode :
to get LTSpice code, after you build the model, go to the "Spice Code" tab, click on the button that says "Spice 3F4" by default. Then you will get a list of choices for what flavour or Spice you want. Select "LT SwitcherCad", and you will get the LTSpice code.
can someone help me "fit" Curve Captor to LTSPICE triode?
to get LTSpice code, after you build the model, go to the "Spice Code" tab, click on the button that says "Spice 3F4" by default. Then you will get a list of choices for what flavour or Spice you want. Select "LT SwitcherCad", and you will get the LTSpice code.
The following is the tube model of 75 for TINA simulator.
I am not familiar with LTSPICE. I hear TINA's model can be
used for LTSPICE.
To make Ayumi´s work in LTspice just exchange all ^ with **
revintage,
Thank you Very Much!
Ayumi,
Domo Arigato!
I was wondering if I could "adapt" the old RCA 7025 Phono preamp circuit to a set of 2A6's or 75's.
It looks like it might work?
Differential between 20hz and 20khz is about 39db and at 1K it is down 19.5db.
That looks to be right about the RIAA curve?
Thank you Very Much!
Ayumi,
Domo Arigato!
I was wondering if I could "adapt" the old RCA 7025 Phono preamp circuit to a set of 2A6's or 75's.
It looks like it might work?
Differential between 20hz and 20khz is about 39db and at 1K it is down 19.5db.
That looks to be right about the RIAA curve?
Attachments
- Status
- Not open for further replies.