"I believe Edge only simulates one driver size at a time"
That hadn't occurred to me, but would explain what i was experiencing
That hadn't occurred to me, but would explain what i was experiencing
"Mirror source - if you driver is close to the ground, the floor reflection reinforces the main drier's output (or, it plays in half-space, depending on how you want to look at it)."
I knew that much . . but
"I think that's what Rudolf was trying to model with the 2 drivers"
. . didn’t know that the Edge’s Y axis could go into the negative. Relooking at Rudolf ‘s post #23 now mostly makes sense.
Thank you!
I knew that much . . but
"I think that's what Rudolf was trying to model with the 2 drivers"
. . didn’t know that the Edge’s Y axis could go into the negative. Relooking at Rudolf ‘s post #23 now mostly makes sense.
Thank you!
Did anyone have any thoughts on rather than a HE super tweeter, crossing actively to a 93 dB Peerless HDS tweeter 810921?
(Not on a tweeter baffle)
(Not on a tweeter baffle)
"Douglas Self's rule of thumb - crossover distortion increases by a factor of three for every order of magnitude reduction in power"
That's an interesting 'fact'. If I understand it correctly the big attraction of class A is the elimination of crossover distortion
That's an interesting 'fact'. If I understand it correctly the big attraction of class A is the elimination of crossover distortion
Again I refer you to Edge for simulations and Rudolph's threads for back to back tweeter results. You can also look at the first post in my Gainphile S11 StigErik fusion thread I linked earlier for Edge simulations of a very similar Vifa tweeter.
Yes, no, maybe. Take a look at Cambridge's class XD whitepaper and Self's blameless amplifier.
- Status
- Not open for further replies.