I was wondering if someone has done a 1ET9040 build and could share some details? I only have the Micro audio Cobra S1 SMPS set, the 1ET9040 and a pair of the new Neurochrome buffers. That means I will need to source the cabling, switches and enclosures, anyone seen or has an idea where to look? Will be truly appreciated!
Sounds like a fun project. Thank you for your support.
The documentation for the buffer is now online: https://neurochrome.com/products/universal-purifi-input-buffer
I give the part numbers for the power connector in the design doc. I assume the Micro Audio uses the same 6-pin connector as the Purifi. If not, I suggest tossing Sami an email.
The 20-pin ribbon cable can be DIYed or bought from a distributor like Digikey. The connectors are IDC connectors with 2.54 mm (0.1") pin pitch. Something like Assmann H3AAH-2006G would work. Search for the part number on Digikey.com and you shall find.
Tom
The documentation for the buffer is now online: https://neurochrome.com/products/universal-purifi-input-buffer
I give the part numbers for the power connector in the design doc. I assume the Micro Audio uses the same 6-pin connector as the Purifi. If not, I suggest tossing Sami an email.
The 20-pin ribbon cable can be DIYed or bought from a distributor like Digikey. The connectors are IDC connectors with 2.54 mm (0.1") pin pitch. Something like Assmann H3AAH-2006G would work. Search for the part number on Digikey.com and you shall find.
Tom