In wall option
I have built a centre speaker based on one of the free designs, using a Pluvia 7.2 HD, and am very happy with it...
I do vagueley remember seeing something, but haven't been able to find it
Are there any plans available for in wall I am helping a friend on a new build dedicated HT, happy to subscribe if they are available.
I have built a centre speaker based on one of the free designs, using a Pluvia 7.2 HD, and am very happy with it...
I do vagueley remember seeing something, but haven't been able to find it
Are there any plans available for in wall I am helping a friend on a new build dedicated HT, happy to subscribe if they are available.
Hello Dave.
I have built uFonken few years ago.
Markaudio Om-mf5 instead of ff85wk.
I am looking back this speaker because with Nelson Pass amplifier,It sounds really good especially late at night.
Om-mf5 is not my taste like alpair so I want to replace driver.
My question is: is it still ff85wk is best driver or if I can replace Fe-83nv,alpair5v3,SS10F or something?
I feel like I needed to build frugel horn for replacing
drivers these days...
I have built uFonken few years ago.
Markaudio Om-mf5 instead of ff85wk.
I am looking back this speaker because with Nelson Pass amplifier,It sounds really good especially late at night.
Om-mf5 is not my taste like alpair so I want to replace driver.
My question is: is it still ff85wk is best driver or if I can replace Fe-83nv,alpair5v3,SS10F or something?
I feel like I needed to build frugel horn for replacing
drivers these days...
Attachments
Last edited:
Those are the small 2 litre uFonken?
The FF85wk wil have the right tuning, but Alpair 5.2/5/3/CHN-50 Faital 3FRx fit the same size box, the big bezel on the Alpairs might be an issue, i made the official 2 litre uMar-Ken a bit wider. The tunign would need to change a bit if you don’t use FF85wk.
Stock the A5.2/3 have an edge on the FF85wk but there are some simple (but non-reversable tweaks you can do to them to bring them closer). Fully treated and EnABLed FF85wKeN and A5.2/3eN are VERY close.
FH-Lite drags the most bottom out of these small drivers. All too often people come back to hear them as opposed to the larger ones, not believing what they are hearing.
dave
The FF85wk wil have the right tuning, but Alpair 5.2/5/3/CHN-50 Faital 3FRx fit the same size box, the big bezel on the Alpairs might be an issue, i made the official 2 litre uMar-Ken a bit wider. The tunign would need to change a bit if you don’t use FF85wk.
Stock the A5.2/3 have an edge on the FF85wk but there are some simple (but non-reversable tweaks you can do to them to bring them closer). Fully treated and EnABLed FF85wKeN and A5.2/3eN are VERY close.
FH-Lite drags the most bottom out of these small drivers. All too often people come back to hear them as opposed to the larger ones, not believing what they are hearing.
dave
Thank you Dave.
It's 2L uFonken for ff85wk.
Sending fee is problem here for EnABLed drivers.
I want to have alpair5v3 or Faital3 in same box.
It's 2L uFonken for ff85wk.
Sending fee is problem here for EnABLed drivers.
I want to have alpair5v3 or Faital3 in same box.
Hi, Dave,
Have you settled on plans for MAOP10 or are they still beta? I would like to subscribe to the Mark Audio plan sets but don't know how to send you email or message -- the recent website revision confuses me. Let me know. Thanks.
Wayne
Have you settled on plans for MAOP10 or are they still beta? I would like to subscribe to the Mark Audio plan sets but don't know how to send you email or message -- the recent website revision confuses me. Let me know. Thanks.
Wayne
Wayne,
You can find my email on my website, planet10-fifi.com.
Leif did the miniOnken prototype, i have not gotten more designs from Scott, those may go thru beta.
dave
You can find my email on my website, planet10-fifi.com.
Leif did the miniOnken prototype, i have not gotten more designs from Scott, those may go thru beta.
dave
hello, i want to buy one plan for Dayton PS-220 onken box. How can I do that. What it is made from? Plywood or MDF of which thickness?
EMail me for details. Quality plywood is highly recommended, typically 18mm, but i will redraw plans if needed to accomodate different material thicknesses.
dave
dave
FF125wk fits into 9 litre enclosure. I just recently did a mod for the Compact FloorStander that shrinks the volume to 9 litres to support a wide range of drivers.
There is also Frugel-Horn Mk3 and L-Stylo 125 (a Fostex based Pensil).
That gives a small, medium, and larger footprint, with the bigger boxes going lower.
dave
There is also Frugel-Horn Mk3 and L-Stylo 125 (a Fostex based Pensil).
That gives a small, medium, and larger footprint, with the bigger boxes going lower.
dave
planet10
Dave have you uploaded any video with demo sound ?
My interest is for MA CHP-90 but I'm not asking you. Any MA driver with similar capabilities record would very much appreciated If there is one please give a link. Just to have an idea .
Elias
Dave have you uploaded any video with demo sound ?
My interest is for MA CHP-90 but I'm not asking you. Any MA driver with similar capabilities record would very much appreciated If there is one please give a link. Just to have an idea .
Elias