Dear Cindra,
I tried MAOP10, CHR70v3, W4-1320SIF, W4-1879 with the same box and sound absorbing material, and they all feel good.
I think the CHP70 will also sound good.
Recently, I replaced the internal cable with a one-step ladder cable to further improve the sound quality.
I tried MAOP10, CHR70v3, W4-1320SIF, W4-1879 with the same box and sound absorbing material, and they all feel good.
I think the CHP70 will also sound good.
Recently, I replaced the internal cable with a one-step ladder cable to further improve the sound quality.
Hi „nandappe“ – greetings to Hitachinaka,
you wrote: "Recently, I replaced the internal cable with a one-step ladder cable to further improve the sound quality"
Close to the weekend I may have a bit stupid question, because I have absolutely no clue - How does that work? What is the idea behind that?What will be the improvement? So that sounds very interesting for me.
Cheers and a nice weekend!
With kind regards
Stefan
you wrote: "Recently, I replaced the internal cable with a one-step ladder cable to further improve the sound quality"
Close to the weekend I may have a bit stupid question, because I have absolutely no clue - How does that work? What is the idea behind that?What will be the improvement? So that sounds very interesting for me.
Cheers and a nice weekend!
With kind regards
Stefan
Dear Stefan,
I use ladder type cables for power supply, RCA, speakers, etc.
Using ladder cables reduces clutter and increases transparency.
Especially full-range speakers are prone to distortion at high volume, but audible distortion at high volume is also reduced.
I do not know the details of the technology, etc.
For details, please visit the website of MARUCHO ENGINEERING(jpn), who holds the patent for this technology.
Japanese
https://laddercable.sakura.ne.jp/onsitu.html
English translation
https://laddercable-sakura-ne-jp.tr..._sl=ja&_x_tr_tl=en&_x_tr_hl=ja&_x_tr_pto=wapp
I use ladder type cables for power supply, RCA, speakers, etc.
Using ladder cables reduces clutter and increases transparency.
Especially full-range speakers are prone to distortion at high volume, but audible distortion at high volume is also reduced.
I do not know the details of the technology, etc.
For details, please visit the website of MARUCHO ENGINEERING(jpn), who holds the patent for this technology.
Japanese
https://laddercable.sakura.ne.jp/onsitu.html
English translation
https://laddercable-sakura-ne-jp.tr..._sl=ja&_x_tr_tl=en&_x_tr_hl=ja&_x_tr_pto=wapp
Hi, in this picture, the ladder is on the source side, but the way you built it, the ladder is on the load side. Could you confirm which one is correct? Maybe there is a translation issue? Thank you!
Just curious, can this design be adapted for TC9FD? Or maybe you have a DDVP design for that driver? Thank you.
Dear nandappe and all
Please advise and comment
I can source locally from Mouser RG cables from Amphenol.
Could you please indicate what construction details are relevant, to this application.. Silver conductor, solid or multistrand. Teflon insulation, etc.
https://br.mouser.com/datasheet/2/18/RG_Cables-1842371.pdf
Thanks in advance.
Please advise and comment
I can source locally from Mouser RG cables from Amphenol.
Could you please indicate what construction details are relevant, to this application.. Silver conductor, solid or multistrand. Teflon insulation, etc.
https://br.mouser.com/datasheet/2/18/RG_Cables-1842371.pdf
Thanks in advance.
My bad!! Sorry, it was my mistake in reading the diagram. I appreciate you taking the time to draw it out for me (us). Thanks!
Dear Nandappe
Thanks for reply. What is the lenght of each step ? From amp to speaker (2,0 ~2,5 meters) how many steps?
Again, thanks in advance.