Hi, I have a question about customization services. I have a little modeling experience from Blender et al but this is my first CAD project. As such I've made a part in Fusion 360 but have come upon a couple possible issues and I'm wondering if just paying for the CAD drawing service would take care of these:
1. I discovered the minimum radius analysis AFTER designing and I have some fillets that don't pass. However my lack of CAD skills is preventing me from properly adjusting the fillet size. Do your techs adjust that sort of thing when it comes up?
2. When I export to DWG/DXF my paths look extremely rough in external viewers but perfectly smooth when imported back into Fusion 360. How can I QC the exported file so I can be confident in the file I send?
1. I discovered the minimum radius analysis AFTER designing and I have some fillets that don't pass. However my lack of CAD skills is preventing me from properly adjusting the fillet size. Do your techs adjust that sort of thing when it comes up?
2. When I export to DWG/DXF my paths look extremely rough in external viewers but perfectly smooth when imported back into Fusion 360. How can I QC the exported file so I can be confident in the file I send?
Hello Jay,
Feel free to PM me the drawing so I can have a look at it. When you say "fillet size" are you talking about tapped holes?
Feel free to PM me the drawing so I can have a look at it. When you say "fillet size" are you talking about tapped holes?
Hi, does anyone know if and when more F5 pcbs are expected in stock? And same for the soft start/speaker protection boards?
Thank you
Thank you
They have been produced and are en-route to the warehouse at the moment, expect ~2 weeks or so.
Hi Jason.
When the new stock of speaker protection boards arrive, could they be made available separately from the soft start boards? The use of a thermistor in various amplifier projects is recommended in the build guides with no reference to the soft start boards. It's a waste to have to purchase both when one will never be used.
Thx!
When the new stock of speaker protection boards arrive, could they be made available separately from the soft start boards? The use of a thermistor in various amplifier projects is recommended in the build guides with no reference to the soft start boards. It's a waste to have to purchase both when one will never be used.
Thx!
We receive the PCBs already packaged and sealed from our supplier, and won't be able to split them. Due to the costs associated with our fulfilment model, it doesn't make sense to sell anything less than about $15 or so per shippable item, which is why these are bundled together. We might split them in the future or change that if we get time to dig deep into a cost analysis but for now we're just keeping it simple - two related things for a good price in one bag. We've had a few requests over the years, but this is more of a business model / fulfilment cost thing.
Thanks Jason for the quick and thoughtful explanation. I completely understand the motivation for the current offering.
May I suggest a quick fix for the future which would be to have speaker protection boards bundled by the manuacturer in groups of two and then offer the speaker protection boards by themselves as a set for mono builds or two stereo builds. They could be offered at existing price. This would encourage customers to build more than one stereo amp and would allow flexibility for mono builds. The manufacturer would benefit because their job would be easier, DIYstore bean counters would be happy as their needs are met with not much effort and DIYers benefit. Same could be done for soft start boards. Win for everyone.
Thx!
May I suggest a quick fix for the future which would be to have speaker protection boards bundled by the manuacturer in groups of two and then offer the speaker protection boards by themselves as a set for mono builds or two stereo builds. They could be offered at existing price. This would encourage customers to build more than one stereo amp and would allow flexibility for mono builds. The manufacturer would benefit because their job would be easier, DIYstore bean counters would be happy as their needs are met with not much effort and DIYers benefit. Same could be done for soft start boards. Win for everyone.
Thx!
I’ve admittedly felt impatient recently waiting for new stock of the Soft Start/Speaker Delay boards for a second Honey Badger build. Any new updates on stock arrival?
Hello 🙂
Just wanted to check
would it be possible that I may get customs charges to the UK on my purchase of
Universal Power Supply
Keratherm Transistor Insulators
F-5T V1/2 Transistor Kit
Linear Systems Matched JFETs
F-5T
Its all quite small stuff so you wouldn't think so but just wondering.
Cheers
Just wanted to check
would it be possible that I may get customs charges to the UK on my purchase of
Universal Power Supply
Keratherm Transistor Insulators
F-5T V1/2 Transistor Kit
Linear Systems Matched JFETs
F-5T
Its all quite small stuff so you wouldn't think so but just wondering.
Cheers
You should check that with UK customs website, they are the ones that decide/set the rules, not whoever sends you stuff.
Two parameters: the kind of goods, and the tariff for the value of those goods. Do you know the value, including shipping?
Tax and customs for goods sent from abroad: Tax and duty - GOV.UK
Jan
Two parameters: the kind of goods, and the tariff for the value of those goods. Do you know the value, including shipping?
Tax and customs for goods sent from abroad: Tax and duty - GOV.UK
Jan
Thanks, I see
With DHL it comes to 189.76 Pound sterling
Hmm yes that website says that under Anything under £135 No charge however
I guess when Items are sent from the US its under big packages to the UK with other peoples purchases ?
If I knew it would make a difference then I would buy two seperate times from the store and split the order.
With DHL it comes to 189.76 Pound sterling
Hmm yes that website says that under Anything under £135 No charge however
I guess when Items are sent from the US its under big packages to the UK with other peoples purchases ?
If I knew it would make a difference then I would buy two seperate times from the store and split the order.
If it is send as a single shipment in two packages you still will pay on the total. It must be two separate shipments.
This is all data that is exchanged between DHL or whoever and customs so it can go through quickly.
If DHL, they will normally prepay the charges and you will need to pay DHL afterwards, including some 'admin fee' for the work they did. Probably around 20 UKP.
Jan
This is all data that is exchanged between DHL or whoever and customs so it can go through quickly.
If DHL, they will normally prepay the charges and you will need to pay DHL afterwards, including some 'admin fee' for the work they did. Probably around 20 UKP.
Jan
Thanks a lot really apreciated, so you think that if I put half the items under £135 in one basket checkout and pay and then maybe tommorow to be safe buy the second lot it may help.
Hi! I am a happy customer of diyAudio Store and consider buing some more PCBs, MOSFET sets etc. As Christmas is in a view already, I wonder if diyAudio Store usually offer any sales/discounts for that period?
What Jim said 🙂
I think there has only ever been two sales in the store's history (the two previous BFCMs). There aren't big margins on the productrs, we rarely are overstocked (usually the opposite), everything is priced just enough to keep the doors open.
This year we probably won't do a BFCM sale because the vibe in the eCommerce world is that the carriers are not prepared for the chaos that will be created over that weekend due to COVID (both less ability to move products and increased online orders in general), defunding of USPS, and the political situation. Last year pretty much every carrier, especially the cheaper ones everyone wants to use (DHL eCommerce Parcel/Standard) went into meltdown, which resulted in annoyed customers (and headaches for us). This year things are predicted to be "beyond-meltdown" with carriers already barely able to keep up due to COVID related retardation of their logistics.
Short story: There's currently no plan for a sale
I think there has only ever been two sales in the store's history (the two previous BFCMs). There aren't big margins on the productrs, we rarely are overstocked (usually the opposite), everything is priced just enough to keep the doors open.
This year we probably won't do a BFCM sale because the vibe in the eCommerce world is that the carriers are not prepared for the chaos that will be created over that weekend due to COVID (both less ability to move products and increased online orders in general), defunding of USPS, and the political situation. Last year pretty much every carrier, especially the cheaper ones everyone wants to use (DHL eCommerce Parcel/Standard) went into meltdown, which resulted in annoyed customers (and headaches for us). This year things are predicted to be "beyond-meltdown" with carriers already barely able to keep up due to COVID related retardation of their logistics.
Short story: There's currently no plan for a sale
Last edited:
Hey,
Is the B1 with korg nutube full kit likely to come back in stock or open for another pre order? If so, when may that be? Just trying to decide whether I should buy the PCB + Jfet kit or wait for it to maybe come back in stock.
Thanks
Ben 🙂
Is the B1 with korg nutube full kit likely to come back in stock or open for another pre order? If so, when may that be? Just trying to decide whether I should buy the PCB + Jfet kit or wait for it to maybe come back in stock.
Thanks
Ben 🙂
