looking for tips labeling Volume, Selector, On/Off on front panel

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
If you can provide clear,accurately dimensioned artwork,any trophy shop can run you off a faceplate,usually CNC laser engraved these days. And there are lots of material choices available too.

I still use one of these,an old manual Scott,and dated be damned!
You would be surprised at how sophisticated a control panel you can make with one of these,if you know your way around the machine.Hiwatt is a good example: (web pics)
 

Attachments

  • scott-sm-300-engraver-pantograph_1_9688caf6cd51f66d1f2df0732b5ef29e.jpg
    scott-sm-300-engraver-pantograph_1_9688caf6cd51f66d1f2df0732b5ef29e.jpg
    247.4 KB · Views: 114
  • 16-2.jpg
    16-2.jpg
    99 KB · Views: 111
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.