@LION SQUAD SOUND - as an alternative you might ask Matthew Morgan J either at Diyaudio - or on Facebook at The High Order Quarter Wave Society for a Paraflex option to a scoop
High Order Quarterwave Society (DIY Bass A-Z) Public Group | Facebook
High Order Quarterwave Society (DIY Bass A-Z) Public Group | Facebook
the speaker described in your input screen has a "short" 1.25 meter path. With the speed of sound ~343M/s its quarter wave is 343/(1.25*4) ~69Hz.
Below is the input for an 18" driver hog scoop and its path is roughly twice of your input
Can you post a drawing or link to a drawing of the cabinet you want to examine with hornresp ?
Below is the input for an 18" driver hog scoop and its path is roughly twice of your input
Can you post a drawing or link to a drawing of the cabinet you want to examine with hornresp ?
Last edited:
Google Image Result for https://www.freespeakerplans.com/images/stories/articles/hog_scoop/hog_scoop.jpg Basically this is the plans but scale it for a 21
thanks - If one scaled that by 1.17X to fit a 21" then the result would be awfully big and cumbersome https://i.imgur.com/7tXFqaq.png
Look at this Speakerplans discussion from a few years back on developing a practical 21" scoop
If you're able to move it or its stationary then you or someone can make a hornresp model and
see how it looks with the 21LW1400
21'' HOG SCOOP desing help - Speakerplans.com Forums - Page 1
Look at this Speakerplans discussion from a few years back on developing a practical 21" scoop
If you're able to move it or its stationary then you or someone can make a hornresp model and
see how it looks with the 21LW1400
21'' HOG SCOOP desing help - Speakerplans.com Forums - Page 1
Last edited:
Basically this is the plans but scale it for a 21
It's a TH.
GM
scaled 1.17:1, I get about a 2.8->2.85M path for a 21" version - roughly a 30Hz 1/4 wave.
one the model is established, 21LW1400 can be plugged into hornresp along with the scaled cabinet's width - then one can use a "wizard" (!) to examine the effects upon response from narrowing the whole cabinet - it may look better in some instances
one the model is established, 21LW1400 can be plugged into hornresp along with the scaled cabinet's width - then one can use a "wizard" (!) to examine the effects upon response from narrowing the whole cabinet - it may look better in some instances
Last edited:
FWIW, did a quickie 18sound 21LW1400 parabolic TH tuned to ~40 Hz to 'hit/slam' at 50 Hz [or does it need to be higher], so considerably smaller than the 18" at ~237 L net and of course won't play as loud.
Note: driver may not physically fit, so S1 may need to be bigger.
GM
Note: driver may not physically fit, so S1 may need to be bigger.
GM
Attachments
GM - that's a fat little hog lots of punch - should handle 1500W peak with ~11mm @~56Hz movement. How would it translate to wood for LION SQUAD SOUND ? How might it sound?
21LW1400 would kinda work in a Karlson (lol) - scaling Acoustic Control's 115BK by 1.4
makes a K-coupler about the size of GM's parabolic TH - but tuning is somewhat below 40Hz
so needs to be tuned higher for punch
21LW1400 would kinda work in a Karlson (lol) - scaling Acoustic Control's 115BK by 1.4
makes a K-coupler about the size of GM's parabolic TH - but tuning is somewhat below 40Hz
so needs to be tuned higher for punch
Last edited:
GM - that's a fat little hog lots of punch - should handle 1500W peak with ~11mm @~56Hz movement. How would it translate to wood for LION SQUAD SOUND ? How might it sound?
Semi-inductance is going to change the response of that horn a bit. I've modified the sim to include some semi-inductance parameters I derived from the published impedance curve for the driver. They're not totally accurate (deriving them using ZMA data would be much better), but better than not using them at all.
Attachments
Hi Brian and GM - I was looking at scaling the posted hog scoop schematic by 1.17:1 for OP's 21LW1400 but goofed and entered things "ND-wise"
might you re-arrange this expansion for proper TH sim ?
that lossy LE sag looks right - (this is a 4.5" coil ?)
might you re-arrange this expansion for proper TH sim ?
that lossy LE sag looks right - (this is a 4.5" coil ?)
Attachments
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Subwoofers
- tell me what do you think