Thanks a lot for the info and the heads-up !
I'll check the player to see which version it is .
Hi friends!
So I got Shigaclon.
Bought for $ 7 JVC RC-X260 with transport SONY KSS-213S are actually one to one that SANYO S101-n 16 pin. Yet removes superfluous for normal switching power on and remove the extra boards and connectors.
So I got Shigaclon.
Bought for $ 7 JVC RC-X260 with transport SONY KSS-213S are actually one to one that SANYO S101-n 16 pin. Yet removes superfluous for normal switching power on and remove the extra boards and connectors.
Attachments
Sorry to say, but JVC RC-X260 have absolutely nothing to do with Shigaclone.
Schematic here JVC RC-X260 Service Manual free download, schematics, eeprom, repair info for electronics
Regards,
Tibi
After a long time idle with this project I want to finish my Shigaclone I.
In the package once sent by Tibi loose contact pins for the connectors were missing. Since the connectors seem to be RM2 not RM2.54, I would like to have any infos about what connectors have been used and where I can get those.
In the package once sent by Tibi loose contact pins for the connectors were missing. Since the connectors seem to be RM2 not RM2.54, I would like to have any infos about what connectors have been used and where I can get those.
Lohk,
Shiga MKI page is still available. vicol audio : shiga CD transport
There is BOM as well. https://docs.google.com/spreadsheets/d/19XvCmUgBZ1pNdmJjldrKittuQcFWaSapwXjPKsislAo/edit#gid=0
Regards,
Tibi
Shiga MKI page is still available. vicol audio : shiga CD transport
There is BOM as well. https://docs.google.com/spreadsheets/d/19XvCmUgBZ1pNdmJjldrKittuQcFWaSapwXjPKsislAo/edit#gid=0
Regards,
Tibi
Thank you. I'll try to get some.
Since there is a MkII for a while, I am sure there are some pages or links for optimizing the MkI board. Can you give me some hints?
Since there is a MkII for a while, I am sure there are some pages or links for optimizing the MkI board. Can you give me some hints?
Maybe you should check why Shigaclone exists.....just my 2 cents.
Nothing out there like it.
foto
Attachments
Last edited:
C'mon apoopo, no need to rain on his parade like that 😀
@amatti73 - Great job with the mounting hardware! Also try mounting the mechanism to the metal plate with just two bolts, rather than four. This will be an improvement sound-wise, and that is also how the original Shigaraki was mounted.
Another tweak I recommend is to get rid of the black plastic cover - it just sounds better without it 😉
@amatti73 - Great job with the mounting hardware! Also try mounting the mechanism to the metal plate with just two bolts, rather than four. This will be an improvement sound-wise, and that is also how the original Shigaraki was mounted.
Another tweak I recommend is to get rid of the black plastic cover - it just sounds better without it 😉
For those still interested in this great CD transport Shigaclone MKII Black - The builders Thread
Brgds,
Tibi
Brgds,
Tibi