DAC ES9038 PRO Group Buys

[Myint67]

Quanghao

LL1684 is new design ?
Let me know part list for RL & D1 .


Best
Myint

 

[Myint67]

Ll1684

 

[quanghao]

Quanghao

LL1684 is new design ?
Let me know part list for RL & D1 .


Best
Myint

hi this more information: ES9018 USB DAC - Hi-Resolution System 

and schema

 

[akltam]

Can the previous LL1684 board be installed in your new Chassis for the ES9038 ?

 

[quanghao]

Can the previous LL1684 board be installed in your new Chassis for the ES9038 ?

Usable, but you have to drill more holes to be fit, because the PCB is very small

thanks

 

[Myint67]

Pls check for RL 1 &D1 ( no detail in ur link )

 

[quanghao]

Pls check for RL 1 &D1 ( no detail in ur link )

not use J5 and D1 and Relay. thanks

 

[lindamar]

Hi Quanghao,

do please review my order to double check how much money should I sent you :

2 sets of (1 + 2) = 2 * (400$ + 150$) = 1.100$
2 PCB sets of (HQ-IV tube output and HQ-HV power supply) = 2 * 60$ = 120$
Shipping = 50$
----------
Total = 1.270$
paypal 2% = 26$
________
Total = 1.296$

I have sent you 584$, so the rest is 712$ . Do you agree with my numbers ?

best regards,
Pepe

 

[bvtrinh]

Boards

Hello Quanghao, can I also purchase the boards for the LL1684?

hi this more information: ES9018 USB DAC - Hi-Resolution System*

and schema

 

[quanghao]

Hi Quanghao,

do please review my order to double check how much money should I sent you :

2 sets of (1 + 2) = 2 * (400$ + 150$) = 1.100$
2 PCB sets of (HQ-IV tube output and HQ-HV power supply) = 2 * 60$ = 120$
Shipping = 50$
----------
Total = 1.270$
paypal 2% = 26$
________
Total = 1.296$

I have sent you 584$, so the rest is 712$ . Do you agree with my numbers ?

best regards,
Pepe

Hi Pepe,
Now HQ-IV tube and HQ-HV power not in stock.
Total: 1173$ - 584$ = 589$.
Please payment.
Thanks!

 

[akltam]

Can the previous remote control be used with this new ES9038Pro DAC ?

 

[Myint67]

Cannot wait test 9038'dac with discrete output .
I2s input from SD transport

 

[quanghao]

Cannot wait test 9038'dac with discrete output .
I2s input from SD transport

Please connect GND transport to GND dac.

Thanks

 

[Myint67]

Thanks Huanghoo,

Best

 

[Myint67]

Hi quanghao,
My I2s output is (data,DCLK , LRCk ,MCLK ) to dac Data ,CLk and MCLK .
So no need to use LRCK right ?
Input is set to USB .

If everything correct ready to start .

Best

 

[smanz]

Hi quanghao,
My I2s output is (data,DCLK , LRCk ,MCLK ) to dac Data ,CLk and MCLK .
So no need to use LRCK right ?
Input is set to USB .

If everything correct ready to start .

Best

Data, LRCK and DCLK always must be conected. Also, don´t forget connect GND.

MCLK, for this dac, is not neccesary.

Regards

 

[Myint67]

Data, LRCK and DCLK always must be conected. Also, don´t forget connect GND.

MCLK, for this dac, is not neccesary.

Regards

Thanks

 

[szczemirek]

Hi Quanghao,
You didn't answer on my emails. Why?
I received board 9038. Following information from post 23:
("Will this new ES9038 board fit the existing ES9018 board like plug and play ?
Ye,
can use 3 chip in PCB"),
I connected it to my HQ Reference DAC. No sound at all! What I done wrong?
PS. Anyway connectors on new pcb are different like on old model.

 

[quanghao]

Hi Quanghao,
You didn't answer on my emails. Why?
I received board 9038. Following information from post 23:
("Will this new ES9038 board fit the existing ES9018 board like plug and play ?

hi!

the DAC LCD it is Lock or No lock ??

check the setup off amanero for usb ??

thanks

 

[szczemirek]

Hi Quanghao,
You didn't answer on my emails. Why?
I received board 9038. Following information from post 23:
("Will this new ES9038 board fit the existing ES9018 board like plug and play ?

hi!

the DAC LCD it is Lock or No lock ??

check the setup off amanero for usb ??

thanks

I returned to old pcb and I haven't photo of LCD with new board but I remember that was No lock with info like: PCM -/0/-
I don't use Amanero at all and i tried setup with and without Amanero.
I'm going to return and check everything again on Saturday.