Vulejoy - you can stop being a jerk now.
Be nice or don't post.
Again.. first we got this argument..
After that, we find out that man actually didn't do anything, and writes about something he does not know..
p.s. is there authority that could prohibit Tapatalk notifications..
I for one have been grateful for sahebs help & advice he didn't say that he had done any mods yet.
He was just giving his opinion.
Sent from my LG-D855 using Tapatalk
He was just giving his opinion.
Sent from my LG-D855 using Tapatalk
Thanks Dave. I just completed the psu etc this month beginning to plan out and execute all the mods it will take some time. I can't work very fast.
Sent from my AO5510 using Tapatalk
Sent from my AO5510 using Tapatalk
Its a great sounding dac Diyinhk power suplies are good & cheap.
I just wish Diyinhk done a display & mc module for this dac.
Sent from my LG-D855 using Tapatalk
I just wish Diyinhk done a display & mc module for this dac.
Sent from my LG-D855 using Tapatalk
No not yet saheb still waiting for display to come.
I have found that my dac plays my 192k music files in 192k through jriver but converts it to 44.1 when played on foobar.
Really pleased with the sound though.
Have you managed to finish your power supplies and get yours working.
Sent from my LG-D855 using Tapatalk
Mine is operational from when we strated interacting. I didn't do the mods which I mentioned earlier, as it is another hard time job. Will do that in a month or so. So you have seen that foobar doesn't do 192khz for this but using jriver it does?
How did you know it is playing 192khz in jriver, and it is not down sampling like foobar?
Sorry for so many questions.
Sent from my AO5510 using Tapatalk
How did you know it is playing 192khz in jriver, and it is not down sampling like foobar?
Sorry for so many questions.
Sent from my AO5510 using Tapatalk
Because i have the led display pcb on my xmos usb pcb the 192k led lights up on pcb when I play on jriver 192k file.
Sent from my LG-D855 using Tapatalk
Sent from my LG-D855 using Tapatalk
Okay sorry i didn't know that, i have a different receiver. Sadly one that doesn't have source detection like your xmos.
Sent from my AO5510 using Tapatalk
Sent from my AO5510 using Tapatalk
http://www.diyinhk.com/shop/audio-k...i2sdsd-pcb-with-ultralow-noise-regulator.html
Sent from my LG-D855 using Tapatalk
Sent from my LG-D855 using Tapatalk
I also read this on voltage regulators.
https://hifiduino.wordpress.com/2011/03/29/new-breed-of-ultra-low-noise-regulators/
Sent from my LG-D855 using Tapatalk
https://hifiduino.wordpress.com/2011/03/29/new-breed-of-ultra-low-noise-regulators/
Sent from my LG-D855 using Tapatalk
Probably switching to something like an124 is probably a best idea in near future
Sent from my AO5510 using Tapatalk
Sent from my AO5510 using Tapatalk
I got 2 of these because they are on offer and I got $20 off by ordering 2.
http://www.diyinhk.com/shop/audio-k...supply-linear-regulator-dual-12v-150max2.html
Sent from my LG-D855 using Tapatalk
http://www.diyinhk.com/shop/audio-k...supply-linear-regulator-dual-12v-150max2.html
Sent from my LG-D855 using Tapatalk
How are you getting on with your dac Saheb?
One thing I needed to do with my dac was the 5v inputs lower them to 3.3v settings on the diyinhk power supply board.
If I run it at 5v I got a slightly distorted sound.
I tested the diyinhk power supplies and they output 5.2v not 5v so lowered them to 3.3v on settings and got a much better sound I didnt mention this before because I thought it may be because I am using tubed output.
Sent from my LG-D855 using Tapatalk
I haven't started to do the mods yet, some of it because of work pressure and other due to me being sick for sometime now. But my deadline is year end, when I will start buying the stuff i need.
In the meantime lets see what others are doing with these dacs or some other variant.
Sent from my AO5510 using Tapatalk
In the meantime lets see what others are doing with these dacs or some other variant.
Sent from my AO5510 using Tapatalk
- Status
- Not open for further replies.