Diyinhk AK4495 dac

[vulejov]

I didnt think they would help me use jlsounds disply to control Diyinhk dac.
They will probably say I should buy jlsounds dac.
Diyinhk said that I need to use a micro controller to control I2c but they cant help.
They said (this is a diy project for you to enjoy)

This is very useful information about DIYINHK..
Just another semifinished dac.. I thought his products are better then other Chinese crap..
Why dont you buy one of these two..
http://www.diyaudio.com/forums/vendors-bazaar/274456-ak4490-usb-dac-dsd-support.html
Products - I2S over USB Audio

 

[saheb11123]

Their boards are better then others yes. But you need to mod it to reach its maximum potential

Sent from my AO5510 using Tapatalk

 

[vulejov]

Those boards works without any problem, this is significant difference between them and other Chinese garbage..
If you know what is maximum potential for AK4490, why dont you try to make new and better board for it..

 

[saheb11123]

No I am happy doing things with thi boards , I am not interested in building or designing a new one.

 

[vulejov]

And, what you do with those boards to reach maximum potencial..

 

[Dave murrey]

This is very useful information about DIYINHK..
Just another semifinished dac.. I thought his products are better then other Chinese crap..
Why dont you buy one of these two..
http://www.diyaudio.com/forums/vendors-bazaar/274456-ak4490-usb-dac-dsd-support.html
Products - I2S over USB Audio

I was tempted to go for jlsounds AK4490 but went for Hiyinhk AK4495 because I read good things about there power suplies & jlsounds didnt do the AK4495.
I think its a good dac for someone with better programing skills than me to implement micro controller.

Sent from my LG-D855 using Tapatalk

 

[saheb11123]

And, what you do with those boards to reach maximum potencial..

Not much, provide low noise shunt supplies cut traces to provide different supplies to different regions use separate output stage and if possible use mcu.

 

[saheb11123]

I was tempted to go for jlsounds AK4490 but went for Hiyinhk AK4495 because I read good things about there power suplies & jlsounds didnt do the AK4495.
I think its a good dac for someone with better programing skills than me to implement micro controller.

Sent from my LG-D855 using Tapatalk

Dave, if that jlsounds board that you bought works then, hurray, all worries are over. If not then..... Well.....

 

[vulejov]

Not much..

Do you have another board without modes to compare..

 

[saheb11123]

Mode?

 

[vulejov]

Mod..

 

[saheb11123]

At present i have only one unmodified board. I will do mods eventually.

Sent from my AO5510 using Tapatalk

 

[vulejov]

So, we don't know for sure that post 62 is true..

 

[saheb11123]

It is true because their layout and materials are better. Smd components are good and are not fake chinese rather original ones

Sent from my AO5510 using Tapatalk

 

[vulejov]

I think that you don't know for sure that those boards not reach maximum potential..
You talking about mods, but you still didn't do any..

 

[saheb11123]

I will find out eventually.

Sent from my AO5510 using Tapatalk

 

[vulejov]

Their boards are better then others yes. But you need to mod it to reach its maximum potential..

I will find out eventually..

As I said, you don't know for sure..
Maybe your eventual mods only ruin excellent products..

 

[saheb11123]

That is for me to determine isn't it?
And what excellent products did I ruin?

Sent from my AO5510 using Tapatalk

 

[vulejov]

Tapatalk..

 

[saheb11123]

[emoji15]

Sent from my AO5510 using Tapatalk