yups, need special time and more coffee and ciggarete,, he he heGood luck soldering DF1704
Attachments
yups, need special time and more coffee and ciggarete,, he he he
more than coffee & cigarette a lot of patient & luck
P.S. I soldered a couple....and if possible i will never again to do.
ha ha ha thats rigth ,,!more than coffee & cigarette a lot of patient & luck
P.S. I soldered a couple....and if possible i will never again to do.
Attachments
Solder shorter parts first...then when you flip the pcb over the parts that are not soldered yet will not slide away from the board.
Then next tallest, etc.
yups dug, absolutely,,,! thank,,
90 percen done,,!
The digital filter is BB DF1704?
Hey, I just inherited a 85-90% completed DAC-38 board
all I'm missing is:
CS8414 chip (X1)
74HCU04 chip (X1)
SSM2142 (X2)
EL2044 (X4)
and especially any kind of schematic...
can someone help me with any of those, all the parts are now obsoleted by mouser and the others....
I could probably find replacements but for the schematic its quite hard.
any help would be appreciated.
all I'm missing is:
CS8414 chip (X1)
74HCU04 chip (X1)
SSM2142 (X2)
EL2044 (X4)
and especially any kind of schematic...
can someone help me with any of those, all the parts are now obsoleted by mouser and the others....
I could probably find replacements but for the schematic its quite hard.
any help would be appreciated.
- Home
- Source & Line
- Digital Line Level
- Starting for soldering my DAC 24bit 96kHz PCM 1704 K