I am lucky my son has a beer shop, about 650 types of bear available!
http://www.flinkgegist.nl/site/assortiment/
In dutch...
http://www.flinkgegist.nl/site/assortiment/
In dutch...
Last edited:
Surprisingly, so many technical pages lately in this thread since yesterday 😀
Mr. Hertog Jan is my usual company. From time to time I also like Franziskaner Weissbier and yes, I smoke when I have beers.
Mr. Hertog Jan is my usual company. From time to time I also like Franziskaner Weissbier and yes, I smoke when I have beers.
I used to smoke, pretty much from the age of 15 until I was 35. I don't miss it one bit.
Here my local beer shop.
Here my local beer shop.
An externally hosted image should be here but it was not working when we last tested it.
i have one set' Paradise phono kit',no time to bulid,asking EUR130,
anyone interested please send mail to me,thanks
anyone interested please send mail to me,thanks
i have one set' Paradise phono kit',no time to bulid,asking EUR130,
anyone interested please send mail to me,thanks
What is in the kit please?
Build number 3.
Quick question, what wattage do we need for the 10k resistor between the two caps on the pre-reg board?

Quick question, what wattage do we need for the 10k resistor between the two caps on the pre-reg board?
Build number 3.
![]()
Quick question, what wattage do we need for the 10k resistor between the two caps on the pre-reg board?
Looks great, did you already test/audition them?
Yeh, tried them last week, they sound fine.
The Hammond's arrived today for my other build so i'll be able to hear what the other PSU sounds like in a day or two.
The Hammond's arrived today for my other build so i'll be able to hear what the other PSU sounds like in a day or two.
Build number 3.
An externally hosted image should be here but it was not working when we last tested it.
Quick question, what wattage do we need for the 10k resistor between the two caps on the pre-reg board?
Where did you get those psu boards ?
Looking great 🙂
They were from a group buy on the diy section of pinkfishmedia they are called hacker caps. Nice little thing space for four diodes, six caps and with four resistors or coils and a couple of LEDs. Also the earthing arrangements are spectacular.
So, here it is now. I kind of liked this industrial design of the steel cases so I got 2 small ones instead of one big. Hum is almost gone, just a little bit audible hum that is not significantly louder than the noise floor. I have to turn the volume up much further than I could while listening to music, I can live with that.
It sounds still very good which means I likely didn't ruin something during my case experiments... surprise 😀
Regards
Sven
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
It sounds still very good which means I likely didn't ruin something during my case experiments... surprise 😀
Regards
Sven
- Home
- Source & Line
- Analogue Source
- Paradise Builders