My I attend this meet?
Peter C.
Hi, Peter
Welcome. I'll add your name to the list.
Regards,
I have a friend in Bradford with big chassis, heat sinks and chokes from old 1960 era industrial electronics for free if anyone wants them..
I'd like to start a discussion on format for the shoot out that way we won't have to waste our time doing it on Saturday. For instance;
Do we want to use vinyl or DAC?
Do we want to have a warm up period for the preamp or just run them one after another changing as quickly as possible.
Do we want to run them in a row or winner of V1 Vs. V2 against V3, etc
Do we want to use just one song or maybe a spectrum of 2 or 3 songs?
What songs/music should we use?
What kind of grading system do we want to use? Do we just want a ranking system and then average the results of the various rankings .. or do we want to have a score card for each preamp with subcategories like; detail, warmth, frequency extension, openness/transparency, musicality, etc?
Anything else to consider?
Hi, AmCan
I think CDs or digital music files are more convenient. Regarding types of music, probably some female and/or male vocal, some strings acoustic instruments like guitar/violin/cello etc. Got to throw in some percussion sound e.g. drum solo, lots of kick drum, organ, piano 😀
I can bring a few CDs for people to try out. Oh, we do need a CD player and an out board DAC for digital music files.
Regards,
My I attend this meet?
Peter C.
Of course. All are welcome. Steve from Audio Sensibility is also coming and my other friend Byron. I'm going to have to re-arrange the house a bit to fit everyone into one listening room but it will be a blast. After the shoot out we cab break up into 2 rooms and set up different systems.
I have a CD Transport, Mac Book Pro, Peter Daniels USB DAC but no SPDIF DAC. Will just have to rip CDS.
Of course. All are welcome. Steve from Audio Sensibility is also coming and my other friend Byron. I'm going to have to re-arrange the house a bit to fit everyone into one listening room but it will be a blast. After the shoot out we cab break up into 2 rooms and set up different systems.
Steve is coming too? Great!!
Regards,
Sounds great. When can we expect to get email regarding location?
Walter
Give me 15 minutes.
Regards,
Lo_Tse
Gentlemen,
I have just PM the names listed in post#299 (and mill23bay) more information about the meet. If you did not receive the PM, please let me know.
Regards,
Lo-Tse
I have just PM the names listed in post#299 (and mill23bay) more information about the meet. If you did not receive the PM, please let me know.
Regards,
Lo-Tse
Hi Lo_Tse,
I'm a new member. I would like to attend the meeting too. Can you send me the details? Many thanks.
Nelson
I'm a new member. I would like to attend the meeting too. Can you send me the details? Many thanks.
Nelson
Hi Lo_Tse,
I'm a new member. I would like to attend the meeting too. Can you send me the details? Many thanks.
Nelson
Hi, Nelson
Just curious, are you planning to bring any gears to the meet?
Regards,
Hi Lo_Tse,
Thanks for your reply. Unfortunately I hurt my back lifting my tower speakers this week so I'll avoid bringing anything heavy to the meeting. I'm upgrading the crossovers to Mundorf and Solen components. I have built several DIY power cables. Is anyone interested in doing A/B testing with these cables?
Nelson
Thanks for your reply. Unfortunately I hurt my back lifting my tower speakers this week so I'll avoid bringing anything heavy to the meeting. I'm upgrading the crossovers to Mundorf and Solen components. I have built several DIY power cables. Is anyone interested in doing A/B testing with these cables?
Nelson
Hi Lo_Tse,
Thanks for your reply. Unfortunately I hurt my back lifting my tower speakers this week so I'll avoid bringing anything heavy to the meeting. I'm upgrading the crossovers to Mundorf and Solen components. I have built several DIY power cables. Is anyone interested in doing A/B testing with these cables?
Nelson
Nelson,
That's fine. I asked the same question to everyone that's coming just for planning reason.
Regards,
Hello Guys
I haven't put my name down to bring any gear as yet - pls let me know what is needed and I will see if I can help.
I can bring in my Dyna ST35 clone (not as great as Jpechloe's KT88 SE amp)
Modified Behringer DEQ (works as an optical SPDIF DAC)
Dynaco ST70
Test Gear
B&W flac music files
I also have tons of diy components if anyone is looking for something specific.
I am looking for a Dynaco A470 or equivalent Power Transformer.
Tube sockets for my tube curve tracer project.
Output Transformers.
I haven't put my name down to bring any gear as yet - pls let me know what is needed and I will see if I can help.
I can bring in my Dyna ST35 clone (not as great as Jpechloe's KT88 SE amp)
Modified Behringer DEQ (works as an optical SPDIF DAC)
Dynaco ST70
Test Gear
B&W flac music files
I also have tons of diy components if anyone is looking for something specific.
I am looking for a Dynaco A470 or equivalent Power Transformer.
Tube sockets for my tube curve tracer project.
Output Transformers.
I have a friend in Bradford with big chassis, heat sinks and chokes from old 1960 era industrial electronics for free if anyone wants them..
Hey Ticknpop - let me know if you have any 5H 200mA 30-60ohm chokes or anything close to this..
Hey Ticknpop - let me know if you have any 5H 200mA 30-60ohm chokes or anything close to this..
Ticknpop ... great if you could bring the Chokes. We can always put big chokes to good use.
Hello,
If its not to late and there's room for one more I'd like to come with some things...
I have small Mini Monitors, Triode Lab 300B power amp and Pre, Music server with JRiver software and Asus Xonar Essence STX sound card..
I can bring any or all any of the above..
Thanks, Joel
If its not to late and there's room for one more I'd like to come with some things...
I have small Mini Monitors, Triode Lab 300B power amp and Pre, Music server with JRiver software and Asus Xonar Essence STX sound card..
I can bring any or all any of the above..
Thanks, Joel
Joel and Nelson
I am checking with AmCan to see how many people his place can handle. As mentioned earlier, in addition to our group from the forum, AmCan is also inviting a group of his audio friends to come to the meet. Looks like it is going to be a "big party".
Regards,
I am checking with AmCan to see how many people his place can handle. As mentioned earlier, in addition to our group from the forum, AmCan is also inviting a group of his audio friends to come to the meet. Looks like it is going to be a "big party".
Regards,
I am going to have to pass on this one.
Something requiring my presence is occurring on Saturday and I can't do both days.
I will have to bring the tpa3116 to the next meet.
Have fun all.
Something requiring my presence is occurring on Saturday and I can't do both days.
I will have to bring the tpa3116 to the next meet.
Have fun all.
Wow! I am at a loss about what to do here. Its not my intention to want to turn anyone away but my listening room is only 12 x 15 - maybe a bit smaller. I do have the second room that we can break up into groups but I assume everyone wants to hear the preamp shoot out and there won't be room for everyone as it is already. With regret I am going to have to cut it off to the original list of people. If you weren't part of Lo_TSE original email group I am sorry but it will have to be next time. I wish I had a bigger house. This bums me out.
- Home
- Member Areas
- Clubs & Events
- Greater Toronto Area DIY meetup