Read those articles.
.
Finesse Voltage Regulator Noise!
.
Reducing Power Supply Ripple and Noise
.
Very interesting for HI-FI audio.
.
But ne za chto...
.
Finesse Voltage Regulator Noise!
.
Reducing Power Supply Ripple and Noise
.
Very interesting for HI-FI audio.
.
But ne za chto...
Last edited:
ne za chto...
You are welcome too. If you will make any practical comparisons with chip shunts and SSLVs or Reflektors, let us know your preferences.
http://www.ti.com/lit/ds/symlink/tps7a3001.pdf
http://www.ti.com/lit/ds/symlink/tps7a4901.pdf
.
See and read those documents.
http://www.ti.com/lit/ds/symlink/tps7a4901.pdf
.
See and read those documents.
Last edited:
There will be thermal trouble. If using slower bigger semis to sustain that, there will be performance loss. For that voltage region, check my SSHV circuits that can go lower than 100-150V with smaller ref resistors or an elevated voltage Reflektor I had shown enough pages back with FBET transistors.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Power Supplies
- The simplistic Salas low voltage shunt regulator