Yes massimo, if we end up with four regulators on one board then I will ask for a v-scoring line to easily separate the two.
OK, the wiki is up and you can add yourselves on whichever option suits you best. Here is the link (also in my signature)
Group buy: reg-v2n-5d shunt regulator PCB - diyAudio
OK, the wiki is up and you can add yourselves on whichever option suits you best. Here is the link (also in my signature)
Group buy: reg-v2n-5d shunt regulator PCB - diyAudio
As we say in London UK 'what a plonker' messed up the wiki, not used it before, hope someone can correct it. Sorry.
honest honest i didn't mean it
...got so confused there were lines and numbers and dots and all sorts of scary things,
I tried my best to get through the maze without hurting anyone, honest.
...got so confused there were lines and numbers and dots and all sorts of scary things,
I tried my best to get through the maze without hurting anyone, honest.
Last edited:
Hehe 
it's inevitable! audiojoy gets the prize!
No harm done, don't worry about it. Just some braces missing, all fixed now.
it's inevitable! audiojoy gets the prize!No harm done, don't worry about it. Just some braces missing, all fixed now.
Added mine as well.
Of course I'll be able to adjust my "order" depending on what the final decision will be be - but I might also need more PCBs (will depend on PCB price). 🙂
Of course I'll be able to adjust my "order" depending on what the final decision will be be - but I might also need more PCBs (will depend on PCB price). 🙂
final schematics +/- rail, BOM, etc
Hi Ikoflexer,
If exist, please be so kind to let me know where can download a pdf that has a nice roundup of all versions and BOMs like Salas Simplistic NJFET RIAA?
I does'nt exist please show me the number post where exist the information needed?
Wich is max/min voltage range & max/min current range?
Sorry for a lot of questions, it's necessary to know because depending of the information will decide how many pcb I need to put in the GB
Thks
Merlin El Mago
Hi Ikoflexer,
If exist, please be so kind to let me know where can download a pdf that has a nice roundup of all versions and BOMs like Salas Simplistic NJFET RIAA?
I does'nt exist please show me the number post where exist the information needed?
Wich is max/min voltage range & max/min current range?
Sorry for a lot of questions, it's necessary to know because depending of the information will decide how many pcb I need to put in the GB
Thks
Merlin El Mago
Good suggestion! I'm working on a document. Please be patient, time is a bit short for me these days, but I will try to post it asap!
P.S. Somebody hacked the tables again 🙂
P.S. Somebody hacked the tables again 🙂
Maybe we should get rid of the tables and just go
Bas Horneman, 2
ikoflexer, 20 ...etc
🙂
Like this:
http://www.diyaudio.com/wiki/Test_wiki?redirect=no
Last edited:
Ikoflexer: thks for your effort. Possibly I do the mistake at the GB😕
Bas Horneman: great idea, do it as easy as everybody understand the GB, also putting all the information in the wiki.
Merlin El Mago
Bas Horneman: great idea, do it as easy as everybody understand the GB, also putting all the information in the wiki.
Merlin El Mago
Yes, as long as someone will cut it, it's probably the best idea, if the savings is worth.
This will depend on whether the scoring is expensive and the pricing policy for multiple circuits on a single PCB.
We have an EU volunteer for our side. Do we need an Asian/Australian and a US/Canada volunteer. They or someone nearby can then do local distribution.
I've been very busy lately with life stuff, last week of work, and end of school year for my daughter, so I'm sorry guys, no progress in the last few days. The good news is that tomorrow's my last day of work and then Christmas holiday 😀 I should have more time to finish this and get quotes for boards. We'll have to make a decision about the kind of boards that we get, quads, doubles, or singles. So far we don't have enough people to get a good price on quads (small number production is expensive). Some people have asked me for estimates, sorry, I have no idea yet. Let's wait 'til next week and we'll see.
the quads can be used to give doubles and singles.
The problem at the moment is the 40 or so that want a +ve regulator only.
How do we satisfy that requirement cheaply?
If scoring is cheap, then quads could be the easiest and cheapest way to buy the PCBs. But what do we do about the +ve only guys?
If you split the order into single +ve and single -ve, then you have two smaller orders. That pushes the cost up for the rest of us.
If you can get the cost down to the CeToole, you have potentially >1000 regulators to source and sell on.
The problem at the moment is the 40 or so that want a +ve regulator only.
How do we satisfy that requirement cheaply?
If scoring is cheap, then quads could be the easiest and cheapest way to buy the PCBs. But what do we do about the +ve only guys?
If you split the order into single +ve and single -ve, then you have two smaller orders. That pushes the cost up for the rest of us.
If you can get the cost down to the CeToole, you have potentially >1000 regulators to source and sell on.
GB
Thks Iko to put the final schematics.
AndrewT if it's necessary to reduce the cost I will change mine request to minimum one or two pcb +/- regs. please let me know?
Merlin El Mago
Thks Iko to put the final schematics.
AndrewT if it's necessary to reduce the cost I will change mine request to minimum one or two pcb +/- regs. please let me know?
Merlin El Mago
- Status
- Not open for further replies.