Tube-I-zator V2.0 Output Stage - Out of production
Posted 7th April 2011 at 01:14 PM by dvb projekt
Updated 30th November 2016 at 10:33 AM by dvb projekt
Updated 30th November 2016 at 10:33 AM by dvb projekt
The Tube-I-zator V2.0

The evolution brings the following changes:
- Heater Switch without any relays
- Low ESR Heater PSU (e.g. Panasonic FM)
- Star Grounding
- Mounting holes for the HV-Salas Shunt Module
- Compacter design
The PCB has the following data:
Material: FR4 - 2mm
Layers: 2
Board size: 193x157 mm
Surface finish: Immersion Gold
Copper weight: 70µm
Soldermask: Both sides - green
Silkscreen: Legend on top
Out of production

The evolution brings the following changes:
- Heater Switch without any relays
- Low ESR Heater PSU (e.g. Panasonic FM)
- Star Grounding
- Mounting holes for the HV-Salas Shunt Module
- Compacter design
The PCB has the following data:
Material: FR4 - 2mm
Layers: 2
Board size: 193x157 mm
Surface finish: Immersion Gold
Copper weight: 70µm
Soldermask: Both sides - green
Silkscreen: Legend on top
Out of production