• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

PCB Group Buy for the "DAC + headphone amp" Project

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Geek

Geek

Member
Joined 2004
Hi folks,

We have some multilayer PCB's for the project found here that will be made up if we can get an interest of 25 pieces.

The boards will be $27.50USD/ea plus shipping.

So far we have interested:

Geek - 1
mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2

Please post here your interest! :)
 
Geek

Geek

Member
Joined 2004
Geek - 1
Update

mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2
ipolyakov - 1
Illusus - 1
proagua - 1
curva - 1
MattN - 2

Total 16+

:)

Greatly appreciate you counts edjosh23 :D
 
gmarsh

gmarsh

Member
Joined 2004
If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?

I'm putting in a different AC socket that Digi-Key stocks, turning the +3.3V regulator 90 degrees so it clears the case, pulling the -12V plane away from the edge to clear the case and making the +3.3V-D/+5V-A transformer smaller.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom