Hi folks,
We have some multilayer PCB's for the project found here that will be made up if we can get an interest of 25 pieces.
The boards will be $27.50USD/ea plus shipping.
So far we have interested:
Geek - 1
mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2
Please post here your interest!![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
We have some multilayer PCB's for the project found here that will be made up if we can get an interest of 25 pieces.
The boards will be $27.50USD/ea plus shipping.
So far we have interested:
Geek - 1
mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2
Please post here your interest!
If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
I'm putting in a different AC socket that Digi-Key stocks, turning the +3.3V regulator 90 degrees so it clears the case, pulling the -12V plane away from the edge to clear the case and making the +3.3V-D/+5V-A transformer smaller.
I'm putting in a different AC socket that Digi-Key stocks, turning the +3.3V regulator 90 degrees so it clears the case, pulling the -12V plane away from the edge to clear the case and making the +3.3V-D/+5V-A transformer smaller.
Does it have to be programed?Never done itTo program the AVR microcontroller, you'll need an Atmel AVR ISP or Ponyprog programmer.
![whazzat :whazzat: :whazzat:](https://files.diyaudio.com/forums/images/smilies/whazzat.gif)
![xeye :xeye: :xeye:](https://files.diyaudio.com/forums/images/smilies/xeye.gif)
Ain´t no turning back.If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
gmarsh said:If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
Please do!
We'd need these for the PCB people before we go to work, so accuracy and changes before I put in the order are welcome
Member
Joined 2002
jleaman said:Shipping is ? ( remember im right across from you)
Shipping will be exact Canada Post Lettermail to your location + $0.50 for the bubble/kraft padded envelope. This goes for all locations. Local pickups (Rosedale, BC) OK
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- PCB Group Buy for the "DAC + headphone amp" Project