Hi folks,
We have some multilayer PCB's for the project found here that will be made up if we can get an interest of 25 pieces.
The boards will be $27.50USD/ea plus shipping.
So far we have interested:
Geek - 1
mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2
Please post here your interest!
We have some multilayer PCB's for the project found here that will be made up if we can get an interest of 25 pieces.
The boards will be $27.50USD/ea plus shipping.
So far we have interested:
Geek - 1
mbcouple - 1 or 2
Ryssen - 1
jleaman - 1
edjosh23 - 1
naz - 1
matjans - 1 or 2
PM650 - 1
chengtaw - 1
AndyB - 1 or 2
Please post here your interest!
If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
I'm putting in a different AC socket that Digi-Key stocks, turning the +3.3V regulator 90 degrees so it clears the case, pulling the -12V plane away from the edge to clear the case and making the +3.3V-D/+5V-A transformer smaller.
I'm putting in a different AC socket that Digi-Key stocks, turning the +3.3V regulator 90 degrees so it clears the case, pulling the -12V plane away from the edge to clear the case and making the +3.3V-D/+5V-A transformer smaller.
Does it have to be programed?Never done it If it has to be, could sommeone do it for me?To program the AVR microcontroller, you'll need an Atmel AVR ISP or Ponyprog programmer.
Ain´t no turning back.If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
gmarsh said:If you're going ahead with this, could I make some changes to the design and supply some fresh gerbers?
Please do!
We'd need these for the PCB people before we go to work, so accuracy and changes before I put in the order are welcome
Member
Joined 2002
jleaman said:Shipping is ? ( remember im right across from you )
Shipping will be exact Canada Post Lettermail to your location + $0.50 for the bubble/kraft padded envelope. This goes for all locations. Local pickups (Rosedale, BC) OK
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- PCB Group Buy for the "DAC + headphone amp" Project