The new Tube-I-zator V3.1 - diyAudio
Go Back   Home > Forums > Blogs > dvb projekt

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Rate this Entry

The new Tube-I-zator V3.1

Posted 16th September 2013 at 05:28 PM by dvb projekt
Updated 6th September 2015 at 03:06 PM by dvb projekt (Stock status update)

The new Tube-I-zator V3.1

Click the image to open in full size.

The evolution brings the following changes:

- Anode PSU with Salas SSHV Shunt Reg. onboard
- External B+ Input for usage with other Anode PSU
- Heater PSU with C-R-C filtering
- Heater PSU with Softstart circuit
- Heater PSU Power LED

- Design failures corrected

Thanks to John (-ecdesigns-) for the following suggestions!

- Grid stoppers to prevent unwanted oscillations
- Bias current injection for TDA1541A usage
- Pull-down resistors to keep the coupling cap output at GND-potential

Still on the Module:

- Heater switch for 6N2P or 12AX7 usage

An example for a balanced use (e.g. Bufalo II), you could see HERE.

The PCB has the following data:

Material: FR4 - 2mm
Layers: 2
Board size: 193x157 mm
Surface finish: Immersion Gold
Copper weight: 70m
Soldermask: Both sides - green
Silkscreen: Legend on top

In Stock

The price will be as followed:

Professional 2-Layer PCB: $30
Worldwide shipping: $ 9
Europe shipping: $ 5
paypal fee: 3,9%

Shipping insurance on buyers request!

A donation of $3 USD to diyAudio will be done for every pcb sold.

Attached Files
File Type: zip Tube-I-zator V3.1 - (7.6 KB, 373 views)
File Type: pdf Tube-I-zator V3.1.pdf (835.7 KB, 853 views)
Posted in Offer
Views 2223 Comments 0 Email Blog Entry
Hide this!Advertise here!

New To Site? Need Help?

All times are GMT. The time now is 07:54 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2