Digital input section completed!
Posted 12th August 2013 at 06:56 AM by dvb projekt
Updated 3rd December 2015 at 04:32 PM by dvb projekt
Updated 3rd December 2015 at 04:32 PM by dvb projekt
Now the digital input section is completed!
Wave I/O for USB input --> SPDIF/AES input board --> FIFO --> Isolator board -->
Dual Clock board with Crystek CCHD-957 clocks (powerd exclusive from a A123 Systems LiFePo4 cell) -->
Ianīs I2S to PCM V2.0 Module --> Red Baron
Because i use two Red Baronīs parallel, i added two additional U-FL connectors for DR and DL.
Wave I/O for USB input --> SPDIF/AES input board --> FIFO --> Isolator board -->
Dual Clock board with Crystek CCHD-957 clocks (powerd exclusive from a A123 Systems LiFePo4 cell) -->
Ianīs I2S to PCM V2.0 Module --> Red Baron
Because i use two Red Baronīs parallel, i added two additional U-FL connectors for DR and DL.
Total Comments 2
Comments
-
Posted same question in group buy before I realized this blog.
What is sound impact of Ian's board; WaveIO isolator; clock?Posted 21st December 2013 at 04:31 PM by wlowes
-
Also... Very controversial topic on DIY audio, I see you use stock USB. I have played around with very short USB to very real or imagined advantage. Solid conductor in parallel in tape to the 5 pin adapter on your WaveIO. Like making an output cap upgrade.Posted 21st December 2013 at 04:36 PM by wlowes
