CMF50 Resistors
My default impression of resistor spec's is 1/2 watt.
It looks like the one's you suggest from Dale (although not your preffered sound) is 1/4 watt.
I will order 1/4 watt's if that's okay, since they are cheaper and smaller.
Has anyone tried PRP, and been satified with them?
I dont think anyone except peter has stated that using exotics in 1K, 10Ohms is the way to go. I would not mind getting another opinion or so. I don't want to take too much away from Nelsons initial art work. If radio shack carbon films sound great, I would like to hear that too.
My default impression of resistor spec's is 1/2 watt.
It looks like the one's you suggest from Dale (although not your preffered sound) is 1/4 watt.
I will order 1/4 watt's if that's okay, since they are cheaper and smaller.
Has anyone tried PRP, and been satified with them?
I dont think anyone except peter has stated that using exotics in 1K, 10Ohms is the way to go. I would not mind getting another opinion or so. I don't want to take too much away from Nelsons initial art work. If radio shack carbon films sound great, I would like to hear that too.
Re: CMF50 Resistors
To be clear, I never said that.
mithomas said:.........Dale (although not your preffered sound).....
I dont think anyone except peter has stated that using exotics in 1K, 10Ohms is the way to go.
To be clear, I never said that.
Re: CMF50 Resistors
I used all 1/2w PRP's stood on end and they sound fine. Tommithomas said:My default impression of resistor spec's is 1/2 watt.
It looks like the one's you suggest from Dale (although not your preffered sound) is 1/4 watt.
I will order 1/4 watt's if that's okay, since they are cheaper and smaller.
Has anyone tried PRP, and been satified with them?
I dont think anyone except peter has stated that using exotics in 1K, 10Ohms is the way to go. I would not mind getting another opinion or so. I don't want to take too much away from Nelsons initial art work. If radio shack carbon films sound great, I would like to hear that too.
1/4 watt resistors will work just fine
http://www.diyaudio.com/forums/showthread.php?postid=746790#post746790
http://www.diyaudio.com/forums/showthread.php?postid=32795#post32795
http://www.diyaudio.com/forums/showthread.php?postid=746790#post746790
http://www.diyaudio.com/forums/showthread.php?postid=32795#post32795
Ignorant MUR3060 diode question
Looks like I ordered the MUR3060 from On-Semi with the uninsulated tab.
Makes me wonder how to bolt these things down without bringing current into the chassis. Will the anode pass current into aluminum?
Here are the units.
http://www.onsemi.com/pub_link/Collateral/MUR3020PT-D.PDF
I have only worked with the gainclone and axial diodes without heatsinks, so dont know how bolting this to the chassis (using a mica insulator of course on bottom, will affect things. Won't some current go through the bolt?
Of course I can hook it up and take the DVM to the thing...
Looks like I ordered the MUR3060 from On-Semi with the uninsulated tab.
Makes me wonder how to bolt these things down without bringing current into the chassis. Will the anode pass current into aluminum?
Here are the units.
http://www.onsemi.com/pub_link/Collateral/MUR3020PT-D.PDF
I have only worked with the gainclone and axial diodes without heatsinks, so dont know how bolting this to the chassis (using a mica insulator of course on bottom, will affect things. Won't some current go through the bolt?
Of course I can hook it up and take the DVM to the thing...
Attachments
You can find Lovoltechs here: http://www.audioprojekte.de/html/semiconductors.html
As to F3 boards, I'm presently out of them.
Still have one set of F4 boards available.
As to F3 boards, I'm presently out of them.
Still have one set of F4 boards available.
Resistor shortages
Sorry for you Digikey Woes.
I ended up ordering Mills @ 1.85 each, and for the Power supplies I ordered Vishay Metal Firms @ 2.12 each from Digikey, although Mills are likely better, I wanted to get the PS together sooner.
The 1/4 Dales should do, and are NP recommended I beleive.
CMF10.0KQFCT from Digi-key
Sorry for you Digikey Woes.
I ended up ordering Mills @ 1.85 each, and for the Power supplies I ordered Vishay Metal Firms @ 2.12 each from Digikey, although Mills are likely better, I wanted to get the PS together sooner.
The 1/4 Dales should do, and are NP recommended I beleive.
CMF10.0KQFCT from Digi-key
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.