V6 amplifier

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Very nice , a current mirrored cascoded VAS like my IC(eyesee) input module.

Run by a CFA front end.

The triple worries me , either decouple the driver/pre (or just the pre) with
a 4R-10R + 22u/.02uf R/C. Also make sure the driver/pre are stellar in the ft
spec ( 100mhz+) ...fast- fast !! outputs just the standard 20-45mhz variety.

OS

Thank You Pete! Glad to see You back to the forum!

I used this triple some times earlier, with no problem. I will try the decoupling if facing with any oscillation or ringing.
The predrivers are KSC3503/1381 (150MHz), the drivers are 2SC4793/2SA1837 (100/70MHz), hopefully the speed will no be issue.

Sajti
 
The local decoupling also makes the PCB layout inductance considerations
minimal. If you find your input / VAS is "on the edge" and has a very high
loop gain F (2+ mhz) , the decoupling is the best insurance to eliminate
unexpected outcomes. :D

PS - I've had excellent results with the 1381/3503 - toshiba pairing.

OS
 
Last edited:
Start to mounting into the box...

Sajti
 

Attachments

  • WP_20161013_16_15_04_Pro.jpg
    WP_20161013_16_15_04_Pro.jpg
    382.3 KB · Views: 1,037
  • WP_20161013_16_15_24_Pro.jpg
    WP_20161013_16_15_24_Pro.jpg
    432.5 KB · Views: 975
  • WP_20161013_16_15_33_Pro.jpg
    WP_20161013_16_15_33_Pro.jpg
    390.3 KB · Views: 933
It's true - OnSemi are discontinuing all TO-92 transistors :( They claim the subcontractor they used to assemble the devices has discontinued the TO-92 package.

However, since they have bought out Fairchild I guess it makes sense, as Fairchild manufacture these parts too!
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.