Very nice , a current mirrored cascoded VAS like my IC(eyesee) input module.
Run by a CFA front end.
The triple worries me , either decouple the driver/pre (or just the pre) with
a 4R-10R + 22u/.02uf R/C. Also make sure the driver/pre are stellar in the ft
spec ( 100mhz+) ...fast- fast !! outputs just the standard 20-45mhz variety.
OS
Thank You Pete! Glad to see You back to the forum!
I used this triple some times earlier, with no problem. I will try the decoupling if facing with any oscillation or ringing.
The predrivers are KSC3503/1381 (150MHz), the drivers are 2SC4793/2SA1837 (100/70MHz), hopefully the speed will no be issue.
Sajti
The local decoupling also makes the PCB layout inductance considerations
minimal. If you find your input / VAS is "on the edge" and has a very high
loop gain F (2+ mhz) , the decoupling is the best insurance to eliminate
unexpected outcomes.
PS - I've had excellent results with the 1381/3503 - toshiba pairing.
OS
minimal. If you find your input / VAS is "on the edge" and has a very high
loop gain F (2+ mhz) , the decoupling is the best insurance to eliminate
unexpected outcomes.
PS - I've had excellent results with the 1381/3503 - toshiba pairing.
OS
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- V6 amplifier