Thanks, George - can you tell me how I can contact "Spencer"?
Regards,
Andrew
He has a store: Store | FET Audio
Rush
It is sounding really serious right now....
Pics latter
Top Experimenting Ricardo !!!
( we like SERIOUS ! )
Cheers.
Si.
PS... Thanks for the EQuations !!!
I did my conversion to the folded and the results are outstanding! Lower noise floor and better sence of timing. Very recommended
Where in this thread can I find the schematic for the "folded RIAA"?
Thanks,
Andy
Go to post one and click bottom link.
Aah, thanks Salas.
Regards,
Andy
Cheers, nothing much for Andy from a land down under where women glow and men plunder.
I always thought the words were "from a land down under where women glow and men chunder"!!
You'll have to Google "chunder". (Also known as "the technicolour yawn". )
Regards,
Andy
You used to have the MM with SUT? Now you converted to full MC folded? K369 or 170s?
Yes, I dropped the transformers earlier and increased gain. I used two 170's with 4.9ohm on each source. I did have to adjust R3 a little to hit the range for VR1.
I know chunder, what is zombie btw? Some word for strong pot? They start in a fried out combie with hilarious hair and weary in the classic video.
Aha - it is "Kombie", not zombie, Salas. A "Kombie" was - still is - one of those VW vans which you could convert into a car to go camping in. And "fried out" means stuffed - ie. mechanically on its last legs.
Regards,
Andy
Yes, I dropped the transformers earlier and increased gain. I used two 170's with 4.9ohm on each source. I did have to adjust R3 a little to hit the range for VR1.
Nice. Completely new board, or you just did a rework?
- Home
- Source & Line
- Analogue Source
- Simplistic NJFET RIAA