Pictures of your diy Pass amplifier

[Extreme_Boky]

Whoah... stunning builds. Impressive.

 

[ronnieponsones]

My 4 DIY builds. Thanks Nelson Pass

 

[von Ah]

50% of my above-ground systems are now running with ACAmini. Just Installed a new one in the dining room. Thanks, @grataku!

 

[TheOtherGoose]

Just another happy camper with a finished kit. Thank you, Mr. Pass, for sharing such a nice design for such a reasonable price!

I made mine an "integrated amp" using an Alps pot.

 

[grataku]

50% of my above-ground systems are now running with ACAmini. Just Installed a new one in the dining room. Thanks, @grataku!

How do you like the felts under the wood plinth? Pretty handy eh?

 

[dantwomey]

Dual M2x’s on an active system.

Regards,
Dan

 

[MesaM]

ACA monoblocks using CPU coolers for heat sinking, each output device attached to its own 'tower' - Installed global rheostat for adjusting fan speed.

 

[MesaM]

"Substation" stereo ACA amp, winter cabin fever drove me to whimsey on this one 🤪

 

[Netlist]

Sheer beauty, I love unconventional designs, but this one is exceptional.
You must be a photographer too?

Hugo

 

[myleftear]

These buggers look cool! Especially the substation!

 

[von Ah]

I decided to try full active DSP again on my 3-way OB speakers today. More amps in service!

• Bass - IcePower 300A2 in classic Hitachi chassis
• Mid - Pass F5m (with outboard power supply)
• High - Pass ACA Mini

Sounds very good after many PEQ tweaks.
Only down side: Iron Pre sitting idle for the moment.

 

[Zen Mod]

you'll go back ........

 

[von Ah]

Haha, certainly.
I have parts on order to redo my analog crossover from parallel to series.

 

[motosapien]

Not very spectacular I know.....my ACA with amethyst led attenuation.

 

[Zen Mod]

Proper Fugly!!

 

[WalterW]

"Substation" stereo ACA amp, winter cabin fever drove me to whimsey on this one 🤪

Is the substation actually doing something? or just for fun? Looks great! I have an old QQE03-20 I can use for that

 

[tanwa]

Hello all
Is it not too late to build my own Aleph P?
Just finish it, I make it dual mono with 256 steps relay volume control by my own coding controler and I also need remote control for the preamp.

All PCB and chassis is my own design. chassis is devided in 2 partitions one for audio section and the other for the noisy part. let pictures told other things.

Hope Aleph P is not obsolete for this board.

 

[mordikai]

wow! Great work!

 

[Gregje]

Nice!

 

[myleftear]

Never too late to build (and post) such perfectly built stuff !