3 MAR6
I have 5 Mar6. 3 of them�@have recently had the same problem.
The two of power fuse are blown in the amplifier. And the other one gets easily heated with no signal. I need a manual or a diagram to seek the cause. Because I'm a new member, I cannot write directly to every one. Please help me to solve the problem.
Thanks!
I have 5 Mar6. 3 of them�@have recently had the same problem.
The two of power fuse are blown in the amplifier. And the other one gets easily heated with no signal. I need a manual or a diagram to seek the cause. Because I'm a new member, I cannot write directly to every one. Please help me to solve the problem.
Thanks!
Single Channel
Hoping to get some help with a fairly straightforward issue. I have a Phonic Max 860 and want to use it with a 300W single Dynacord speaker for monitoring. If I used it bridged, it outputs 600W which might damage the sxpeaker, but can I use only one channel without damaging the amp by having no speaker connected to the other channel? Thanks.
Hoping to get some help with a fairly straightforward issue. I have a Phonic Max 860 and want to use it with a 300W single Dynacord speaker for monitoring. If I used it bridged, it outputs 600W which might damage the sxpeaker, but can I use only one channel without damaging the amp by having no speaker connected to the other channel? Thanks.
its on the way, service manual sent, HAPPY Holidays
Regards,
audiomachines
hello!
I need the mar6 service manual you can send to my email ingfercordova@hotmail.com
thankyou!!!
I need the mar6 service manual you can send to my email ingfercordova@hotmail.com
thankyou!!!
Idon't have schematic , I, have full SERVICE MANUAL.
It 's abouy 2,5Mb.
Hello!
can you send me this service manual (phonic mar4) ?
thnx!
hi, zeonrider.. i'm a newbie here. I'm seeking some help.. have phonic mar-4&6 amplifiers that i've been using for quite a long time. i'm having a problem with its output. I need a schematic diagram or servicing manual.. please help. my email address: lgdaudio@yahoo.com
I just have a question about voltages in Phonic MAX2500. Can somebody tell me exact voltages for this amp??? Thanks
PSU voltage?
Thank you for schematic but I already have it. In service manual I have described all tree models but with only one schematic attached. On that schematic voltages are +90,+55,0,-55,-90 and I have found those voltages on my Max1500 but I do not know voltages on MAX2500 because it is not described separately in this service manual. On this sheme I see voltages +100,+55,0,-55,-100. Is it correct value for max2500?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Solid State
- PHONIC max 860