I am really intrested to know if this design would work with some of the cheaper Fostex drivers, I assume it would. I am really intrested in building a pair and I want to know all I can. If you could email me at gregmavity@gmail.com that would be geat. Thanks
-greg
-greg
Rebonjour,
Yes it is celà I shall like creating these surrounding walls(speakers), then if you have a plan with the measures çà shall be great.
Thank you in advance Dominique Masson
I live in the Paris region in meadows of Paris my e-mail: vipere_md@hotmail.
Yes it is celà I shall like creating these surrounding walls(speakers), then if you have a plan with the measures çà shall be great.
Thank you in advance Dominique Masson
I live in the Paris region in meadows of Paris my e-mail: vipere_md@hotmail.
Rebonjour,
Yes it is celà I shall like creating these surrounding walls(speakers), then if you have a plan with the measures çà shall be great.
Thank you in advance Dominique Masson
I live in the Paris region in meadows of Paris my e-mail: vipere_md@hotmail.fr
Yes it is celà I shall like creating these surrounding walls(speakers), then if you have a plan with the measures çà shall be great.
Thank you in advance Dominique Masson
I live in the Paris region in meadows of Paris my e-mail: vipere_md@hotmail.fr
Bonjour Dominique,
Je ne frequent ce forum depuis quelques annees. J’ai trouve ton message par hazard aujourdhui quand j’ai voulu montrer mes enceintes a un ami. Je n’ai pas des dessins de detail. Mon seul dessin a ete le jpg presente en post #10. Le reste a ete improvisation.
Pardonne mon Francais. J’ai appris le Francais a l’ecole, mais je n’ai pas eu l’occasion de pratiquer.
Bonne chance,
Michael Speaker
Je ne frequent ce forum depuis quelques annees. J’ai trouve ton message par hazard aujourdhui quand j’ai voulu montrer mes enceintes a un ami. Je n’ai pas des dessins de detail. Mon seul dessin a ete le jpg presente en post #10. Le reste a ete improvisation.
Pardonne mon Francais. J’ai appris le Francais a l’ecole, mais je n’ai pas eu l’occasion de pratiquer.
Bonne chance,
Michael Speaker
Hello Dominique,
I do not frequent this forum in recent years. I found your message by chance today when I wanted to show my pregnant friend. I did not detail drawings. My only design was presented the jpg in post # 10. The rest was improvisation.
Pardon my French. I learned French at school, but I have not had the opportunity to practice.
Good luck,
Speaker Michael
English please
dave
English please
dave
With few corrections (no pregnant friend):
Hello Dominique,
I do not frequent this forum in recent years. I found your message by chance today when I wanted to show my enclosures to a friend. I don’t have exact drawings. My only plan was the jpg in post # 10. The rest was improvisation.
Pardon my French. I learned French at school, but I have not had the opportunity to practice.
Good luck,
Speaker Michael
No reason why something similar can't be done. Personally, I don't much like smooth curves in back horns, since it tends to allow maximum efficiency at the top of the gain BW and offers no additional low-pass assistance to the chamber / throat. They do look pretty though.
Hmm. Someone asked Dave & I for a curved box for the D5nf a while ago; we did it, but the chap vanished, leaving us with a redundant design. I have little interest in Feastrex, but the 168 might go in with some tweaks; I'll have a look when I get a spare minute. Looks more like a Little-Big-Horn or Algahorn than the Hedlund though.
Hmm. Someone asked Dave & I for a curved box for the D5nf a while ago; we did it, but the chap vanished, leaving us with a redundant design. I have little interest in Feastrex, but the 168 might go in with some tweaks; I'll have a look when I get a spare minute. Looks more like a Little-Big-Horn or Algahorn than the Hedlund though.
No reason why something similar can't be done. Personally, I don't much like smooth curves in back horns, since it tends to allow maximum efficiency at the top of the gain BW and offers no additional low-pass assistance to the chamber / throat. They do look pretty though.
Hmm. Someone asked Dave & I for a curved box for the D5nf a while ago; we did it, but the chap vanished, leaving us with a redundant design. I have little interest in Feastrex, but the 168 might go in with some tweaks; I'll have a look when I get a spare minute. Looks more like a Little-Big-Horn or Algahorn than the Hedlund though.
Thanks Scott. You are right about more top end getting through the horn, which is where sharper bends help.
Apart from the BIB, there doesn't seem to exist any cab which brings out the best all-round performance of the 168Sigmas. How about a ML-TQWT which may greatly help with a better low frequency response at minimum cone excursion?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Full Range
- my Hedlund horn with FE208ESigma