Not bad for a beginner. Seriously, well done and thanks for sharing.
Little confused about referring to the midbass as a "J Horn". .. which to me implies a horn in the shape of a "J". Or am I just not informed in the art of "horn speak"?
The model is called that, I don't really know why
It would be more expensive to do them over in any material seriously though, I did not pay much for the job and aluminum looks way better than plywood. I did not go for aluminum because of the strength, at least not for now. Should I go for a larger ALE driver the case might be different
Thank you!
At last, the 3-way satellite was up and running.
Here seen with the prototype en baffle bass units I initially had plans of finalizing to go with a 2-way horn sattelite. Since I later went ahead with the midbass horn, I saw the opportunity to build something quite different. I had earlier assisted in designing and building a huge SLOB with a friend and DIY mentor, and a plan started emerging.
At last, the 3-way satellite was up and running.
Here seen with the prototype en baffle bass units I initially had plans of finalizing to go with a 2-way horn sattelite. Since I later went ahead with the midbass horn, I saw the opportunity to build something quite different. I had earlier assisted in designing and building a huge SLOB with a friend and DIY mentor, and a plan started emerging.
- Status
- Not open for further replies.
- Home
- Loudspeakers
- Multi-Way
- My DIY Horn setup