Yes, share the pictures as everybody else and not in the shadows...
Regards
+1
In my Bom there are digikey partnumbers...
Really?
I got this as an example, not much to hang in the christmastree is it :
5 1uf * C0603 C24, C26, C31, C33, C34 https://dl.dropboxusercontent.com/u/7229030/ES9018 K2M BOM.rar
Try this:I hev redmarked the components not neded in hardwaremode.
Try this:I hev redmarked the components not neded in hardwaremode.
https://dl.dropboxusercontent.com/u/7229030/ES9018 K2M BOM.rar
Try this:I hev redmarked the components not neded in hardwaremode.
Tack Åke
Strange, I had asterisks in mine on everything but C29/30 which stated Wima MKS-63V
Regards
Don't bought anything else to syllable!!! He never test pcb production and makes error on them!
SDF where did you found the errors? Did you mean the isolated i2c interface. Would you be interested in the assembled and tested products at my price?
Of course he means the broken connection to GND (first filter caps after the rectifiers) as shown in the "Building...." thread. You would have noticed this error yourself if you would have built your own design just like the fellow countrymen that posted they had a working DAC.....No one mentioned this item...It seems your PCB has a design error that results in broken regulators in which case it would be nice that you would think about offering a workout/solution and inform everyone that bought PCBs before other builders have the same failure. Your first post would be an excellent way and also the "Building..." thread would be an even better spot to post useful info if only to prevent builders making the same error.
http://www.diyaudio.com/forums/digital-line-level/257952-low-cost-es9018-dac-builders-thread-5.html
It really would help if you communicate with the buyers of your products and if you also read this and the aforementioned thread about your product on a regular basis.
http://www.diyaudio.com/forums/digital-line-level/257952-low-cost-es9018-dac-builders-thread-5.html
It really would help if you communicate with the buyers of your products and if you also read this and the aforementioned thread about your product on a regular basis.
Last edited:
Sorry, Syllable if I m wrong, but point raised by fellow builders and diy members, is to build your own design, even being first to do so, or even better is to etch pcb according schematics prior any GB to eliminate error from the start, thus us, builders can be sure- device is working and no harm (material or other) or any risk in taking on your project.
I haven't build many , but all my projects were greatly supported by designers, including JP.
So, asking somebody to send their parts and boards for you to build is not an option.
I haven't build many , but all my projects were greatly supported by designers, including JP.
So, asking somebody to send their parts and boards for you to build is not an option.
Can someone sum up where things got to on this group buy or where to get that info?
I will guy to go through the pages, which are a lot, to see if this what I'm looking for.
My idea was to use this ES9018K2M board as DAC:
ES9018K2M ES9018 I2S Input DAC Decoder Board Support IIS 32bit 384K DSD64 | eBay
But my dilemma is how to interface it with coaxial, usb and optical input options.
I will guy to go through the pages, which are a lot, to see if this what I'm looking for.
My idea was to use this ES9018K2M board as DAC:
ES9018K2M ES9018 I2S Input DAC Decoder Board Support IIS 32bit 384K DSD64 | eBay
But my dilemma is how to interface it with coaxial, usb and optical input options.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Low cost ES9018 DAC board GB