Bulb for 3M MP8650
Hi, YWH
Looks like you have been replacing bulbs on this thread for a few years. I have done lots of reading.
I need a bulb for a 3M MP8650.
Bulb is Toshiba, SMDR350-FT. It is exactly like the pictures in post #1790
http://www.diyaudio.com/forums/showthread.php?s=&postid=1476207&highlight=#post1476207
You replied the bulb was DC, but replacement.pdf says all 3M projectors are AC.
I think best bulb would be a Jys350. I don't know AC or DC? I can not test it.
My old bulb is burnt inside and can't see the electrodes. Bubble is dark.
Which bulb should I order Jys350 DC or AC?
Thanks!
Hi, YWH
Looks like you have been replacing bulbs on this thread for a few years. I have done lots of reading.
I need a bulb for a 3M MP8650.
Bulb is Toshiba, SMDR350-FT. It is exactly like the pictures in post #1790
http://www.diyaudio.com/forums/showthread.php?s=&postid=1476207&highlight=#post1476207
You replied the bulb was DC, but replacement.pdf says all 3M projectors are AC.
I think best bulb would be a Jys350. I don't know AC or DC? I can not test it.
My old bulb is burnt inside and can't see the electrodes. Bubble is dark.
Which bulb should I order Jys350 DC or AC?
Thanks!
Hi ywh
they did not accept mailing address in chinese here...can you please give it to me in english? ankitgupta711@yahoo.com
they did not accept mailing address in chinese here...can you please give it to me in english? ankitgupta711@yahoo.com
I may be interested in sending the relector, and get the lamp installed by you (I don't know if my relector is still usefull, because my previous lamp exploded and the front glass is now broke). My mail is cromugnon (at) hotmail.com
Email address edited by mod - replace the (at) with @
Email address edited by mod - replace the (at) with @
Need a bulb = NSH200BQ 200W for a VP6111
Hi,
Can anyone supply me with the bulb for a 200W NHS200BQ and instructions on how to fit it in please?
Or can anyone sell me the complete lamp unit for a HP VP6111 please.
Will be happy to pay
Live in the UK
My email is cprsmith86@btinternet.com
Thankyou very much
Hi,
Can anyone supply me with the bulb for a 200W NHS200BQ and instructions on how to fit it in please?
Or can anyone sell me the complete lamp unit for a HP VP6111 please.
Will be happy to pay
Live in the UK
My email is cprsmith86@btinternet.com
Thankyou very much
bulb replacement for Infocus X1
Hi ywh,
I need a replacement bulb for my Infocus X1 projector. Let me know how much and how to pay. Replacing the bulb from within the lamp assembly is new for me so assuming you can provide a bulb for the projector can you or someone else advise me on how to take a part the assembly and the DO's and DON'T's of replacing the bulb?
Thanks,
Pants On Fire
Hi ywh,
I need a replacement bulb for my Infocus X1 projector. Let me know how much and how to pay. Replacing the bulb from within the lamp assembly is new for me so assuming you can provide a bulb for the projector can you or someone else advise me on how to take a part the assembly and the DO's and DON'T's of replacing the bulb?
Thanks,
Pants On Fire
replacement lamp
I'm new to this whole deal but learning fast. There's some interesting misinformation on replacing lamps on the net.
They are trying to discourage even replacing even the whole bulb and reflector unit with ridiculous excuses - dust etc and advising only purchasing the entire housing. They claim you can damage the projector - but even if true when a new lamp and housing costs as much as a new projector who cares?
There's an interesting video on youtube outlining the "hazards" as well taking about how geniune bulb companies have invested millions and how the non genuine relacements will only last 200 hours. It reminds me of the printer companies recommending purchasing whole new cartridges for $60 rather than refilling the ink.
Enough ranting. Is there a way to contact YWH directly to make an order - I can't find a link or email address?
I would like to purchase a replacement unit for the sharp xr-1s - the lamp bulb is an SHP 60 DC 150 watt - but I can't find the required voltage.
I removed the bulb from the reflector housing and maked the position but it doesn't fit through the hole in the reflector base - when I tried to remove it from the other direct the wire plug unit doesn't fit through the hole either so I had to break the bulb.
Will this be a problem with inserting the new one?
You guys are terriffic doing a great servive. Many thanks.
I'm new to this whole deal but learning fast. There's some interesting misinformation on replacing lamps on the net.
They are trying to discourage even replacing even the whole bulb and reflector unit with ridiculous excuses - dust etc and advising only purchasing the entire housing. They claim you can damage the projector - but even if true when a new lamp and housing costs as much as a new projector who cares?
There's an interesting video on youtube outlining the "hazards" as well taking about how geniune bulb companies have invested millions and how the non genuine relacements will only last 200 hours. It reminds me of the printer companies recommending purchasing whole new cartridges for $60 rather than refilling the ink.
Enough ranting. Is there a way to contact YWH directly to make an order - I can't find a link or email address?
I would like to purchase a replacement unit for the sharp xr-1s - the lamp bulb is an SHP 60 DC 150 watt - but I can't find the required voltage.
I removed the bulb from the reflector housing and maked the position but it doesn't fit through the hole in the reflector base - when I tried to remove it from the other direct the wire plug unit doesn't fit through the hole either so I had to break the bulb.
Will this be a problem with inserting the new one?
You guys are terriffic doing a great servive. Many thanks.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Everything Else
- The Moving Image
- DIY Projectors
- I got my new lamp. It is for commercial projection use. people use it to replace the