actually these lines:
"The designs are first rate using only the finest materials and each of them employ mulipal propretory technologies. They easily out perform anything the likes of"
where just enough to ensure i would not consider this a company with a real foundation to support it.
Actualy if any company has a claim like that, it means for me to RUN RUN RUN and never look back.
"The designs are first rate using only the finest materials and each of them employ mulipal propretory technologies. They easily out perform anything the likes of"
where just enough to ensure i would not consider this a company with a real foundation to support it.
Actualy if any company has a claim like that, it means for me to RUN RUN RUN and never look back.
I have two years now 3 X CO15V in my system
One is the center of my cinema
SR hemp FR8C, SRB hemp FR4.5 and an eminece lab12 SW with hypex
Stereo system has its own amplifiers and sources.
CO15V plays in 130lt BR box as a 3 way with a Fostex A90
At the beginning i was playing with SET and triodes
but when i managed to make 2'' play with more than 200W (tubes or transistor) it is GOOD!!!
2order cross at ~1k and ~10k
autotransformer B&K3636 for the 2'' driver
One is the center of my cinema
SR hemp FR8C, SRB hemp FR4.5 and an eminece lab12 SW with hypex
Stereo system has its own amplifiers and sources.
CO15V plays in 130lt BR box as a 3 way with a Fostex A90
At the beginning i was playing with SET and triodes
but when i managed to make 2'' play with more than 200W (tubes or transistor) it is GOOD!!!
2order cross at ~1k and ~10k
autotransformer B&K3636 for the 2'' driver
Attachments
Would like to see the crossover schematic
Mine just plays better and better ...
Sincerely
I still love My Co15V's ,The crossover I am using is 12db slope linkwitz centered at 612hz with 7db attenuation to the HF ,I will look for the schematic, uses 2, 4.5mh coils and 2, 16uf caps picture..
Andrew
Yes you sent me an email some time ago with some measurements and schematics.
I myselg ended up with a different XO. 1 order for the woofer, 2 order for the tweeter and baffle step correction. XO point approx 1250 Hz if I recall correct.
For me I think it is superb
I think it is the best drawing on the Internet today
I myselg ended up with a different XO. 1 order for the woofer, 2 order for the tweeter and baffle step correction. XO point approx 1250 Hz if I recall correct.
For me I think it is superb
An externally hosted image should be here but it was not working when we last tested it.
I think it is the best drawing on the Internet today
thanks for your schematic,(modern art), I will give it a try also. I just bought another set of CO15V'z and I am most of the way with a build of my 604 Angel cabinets for them.
what cabinets do you have your's in??
this is my first set , unchanged for 5 years with WAF!
Cheers from Canada
Andrew
what cabinets do you have your's in??
this is my first set , unchanged for 5 years with WAF!
An externally hosted image should be here but it was not working when we last tested it.
Cheers from Canada
Andrew
Yes you sent me an email some time ago with some measurements and schematics.
I myselg ended up with a different XO. 1 order for the woofer, 2 order for the tweeter and baffle step correction. XO point approx 1250 Hz if I recall correct.
For me I think it is superb
An externally hosted image should be here but it was not working when we last tested it.
I think it is the best drawing on the Internet today
I have never before been entertained by a crossover schematic. This is a masterpiece!
I have never before been entertained by a crossover schematic. This is a masterpiece!
Yes the proverbial napkin drawing,great stuff
Dutch! Good to see your work again. Love the coax corner horn.
.
.
Great to hear from you again Pano (MM) thanks for the kind remarks. working on another set with a new set of the CO15V'z , what is up with Hemp acoustics now? do you still have involment? I'm talking with PP for a plan but don't know what to think?
Haven't done Hemp in years. Great drivers tho. Wish I still had mine.
But can't complain - all Altec now. Horns, of course!
I'm surprised to hear that there are still CO15Vs running around loose. Did you snag the last pair?
Yes Can't be without my Altec's too, love my 416 8b in my midbass. and I have pair 604HPLN last of the Alnico. but love my JBL's too.
I bought the Hemps from Oregon new unused from abandoned project ,must be the last of them?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Multi-Way
- Hemp Coaxial