You said that!
Of course.
Let me know in time, I live modestly, but my house is big.
Of course.
Let me know in time, I live modestly, but my house is big.
Sure, I will let you know. Thank you!
When is the best season to visit Argentina?
(Sorry for OT)
Sure, I will let you know. Thank you!
When is the best season to visit Argentina?
(Sorry for OT)
In summer my town is like hell, the rest of the year is nice, beautiful landscape with mountains, beautiful women, and a delicious meat ...both cow and pig.
I'll be waiting for you, seriously !
In summer my town is like hell, the rest of the year is nice, beautiful landscape with mountains, beautiful women, and a delicious meat ...both cow and pig.
I'll be waiting for you, seriously !
Thank you, I will discuss with my family!
Thank you, I will discuss with my family!
Ok. if they are not too many you can bring them with you.
Ok. if they are not too many you can bring them with you.
Don't worry, less than a dozen.
Don't worry, less than a dozen.
I spoke with my wife.
After beating me, she agreed.
By private message I send you my email address.
>>>> There is 30V at the PS, I have no idea where it goes.
+30V applayed to filaments for AC "Hum-m-m!" noise cancellation. Just solder together points "A" on PSU schematic.
Hello
Would you be so kind please help me with these +30 on the PSU circuit.
I do not have center tap (or A point) at 6.3V and 12V heater..
Where I connect the +30 in my case or just leave it out?
Please take a look at my parts I have for these amp PSU!
I also purchased a par OPT 3.5K 10W 100mA continuous bias.. Al together I have 90-95% of the parts.
I would love to test the amp but with that +30 I don't know what to do..
The 12V for the GU50 is a separate transformer also I have DC PSU for the GU50 if that is better all do that is only 2A the AC is 5A.
Thanks
Greetings Gabor
Attachments
Hello
Would you be so kind please help me with these +30 on the PSU circuit.
I do not have center tap (or A point) at 6.3V and 12V heater..
Where I connect the +30 in my case or just leave it out?
Please take a look at my parts I have for these amp PSU!
I also purchased a par OPT 3.5K 10W 100mA continuous bias.. Al together I have 90-95% of the parts.
I would love to test the amp but with that +30 I don't know what to do..
The 12V for the GU50 is a separate transformer also I have DC PSU for the GU50 if that is better all do that is only 2A the AC is 5A.
Thanks
Greetings Gabor
You do not need this.
Look: http://www.diyaudio.com/forums/tubes-valves/211731-heater-wiring-good-bad-ugly-7.html
post 69. It is really works.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Help with these Russian GU50 tube amplifier