Ok, I am ordering output transformers from Edcor USA (they gave the best price/performance ratio until now).
They will cost me $77.80 each when I buy a certain party. Northern Californian DIYers may pick up, otherwise please calculate actual shipment costs from Walnut Creek, California (94597) +$5 packing/ handling per parcel.
If you want to pay using PayPal please also remember that they charge a money for a butter on their bread. Since I don't do business on transformers it means they charge you.
100 Watt 10,000 ohms Plate to 4, 8, & 16
ohms
40% Screen Voltage 20Hz~20KHz
Classic Push Pull Transformer
They will cost me $77.80 each when I buy a certain party. Northern Californian DIYers may pick up, otherwise please calculate actual shipment costs from Walnut Creek, California (94597) +$5 packing/ handling per parcel.
If you want to pay using PayPal please also remember that they charge a money for a butter on their bread. Since I don't do business on transformers it means they charge you.
100 Watt 10,000 ohms Plate to 4, 8, & 16
ohms
40% Screen Voltage 20Hz~20KHz
Classic Push Pull Transformer
Weight for each transformer is 11 pound (they are the same size, power and output transformers).
Power transformers (one per pair of output transformers, but you may order more for monoblocks) will cost $84.50 each for me.
Dual 120V primaries, secondaries 265-0-265 500mA, 12.6V 2.5A, 12.6V 2.5A, 60V 50mA (four secondaries) For a total 331 VA total power.
Please email me to arrange payments/shipments.
Power transformers (one per pair of output transformers, but you may order more for monoblocks) will cost $84.50 each for me.
Dual 120V primaries, secondaries 265-0-265 500mA, 12.6V 2.5A, 12.6V 2.5A, 60V 50mA (four secondaries) For a total 331 VA total power.
Please email me to arrange payments/shipments.
Hi Cobra2!
Let's calculate some details...
If you want, say, 6 trafos for example, it will be 66 pound unpacked.
USPS wants $374.25 for Global Express Guaranteed® Non-Document Service
I don't know why USPS calculator did not give other shipment options, I think some slow shipment should be available, no?
UPS wants:
UPS Worldwide Saver
584.25 USD*
UPS Worldwide ExpeditedSM
466.55 USD*
I.e. they will cost you almost twice.
Let's calculate some details...
If you want, say, 6 trafos for example, it will be 66 pound unpacked.
USPS wants $374.25 for Global Express Guaranteed® Non-Document Service
I don't know why USPS calculator did not give other shipment options, I think some slow shipment should be available, no?
UPS wants:
UPS Worldwide Saver
584.25 USD*
UPS Worldwide ExpeditedSM
466.55 USD*
I.e. they will cost you almost twice.
Cobra2 said:Pre-paid for 2 amps...!
Arne K
Well, still need to cover a shipment.
They promised to ship output transformers tomorrow. Now, I have another problem: where to find right power trannies?
Antek sells toroids much cheaper than Edcor wants for E-core trannies, but when I ask Antek about slightly redesigned transformers they don't answer...
Which another sources to try?
Antek sells toroids much cheaper than Edcor wants for E-core trannies, but when I ask Antek about slightly redesigned transformers they don't answer...
Which another sources to try?
They are 2 per box, 21 lB packed.
Do you want me to ship them now, or will wait for power trannies?
They will be of the same size so I am going to draw layout and order chassis' with holes for 4X GU-50 sockets, 6x 9-pin sockets (2X6N2P+2x6N1P+2xEM80) and one 7 pin socket (0A2)
Front panel: 2 level knobs, 1 power switch, 1 ignition key.
Rear pannel: 2 TRS jacks for input, 2 TRS jacks for 4 Ohm outputs, 2 TRS jacks for 8 Ohm outputs, 2 TRS jacks for 16 Ohm outputs, 1 power cord socket, 2 fuse holders.
1U high, rack mount geometry.
Do you want me to ship them now, or will wait for power trannies?
They will be of the same size so I am going to draw layout and order chassis' with holes for 4X GU-50 sockets, 6x 9-pin sockets (2X6N2P+2x6N1P+2xEM80) and one 7 pin socket (0A2)
Front panel: 2 level knobs, 1 power switch, 1 ignition key.
Rear pannel: 2 TRS jacks for input, 2 TRS jacks for 4 Ohm outputs, 2 TRS jacks for 8 Ohm outputs, 2 TRS jacks for 16 Ohm outputs, 1 power cord socket, 2 fuse holders.
1U high, rack mount geometry.
Re: A complete kit...?
Arne, I hope your real last name is not Behringer?
Cobra2 said:I will wait for power-trannies & parts!
Arne, I hope your real last name is not Behringer?
Cobra2 said:I did not see that remark...
My GU50 bin
I am ordering chassis' for exactly such sockets like yours.
Re: Other sockets:
I mean left one.
What are distances between holes for bolts, and what size of a big hole is needed to mount it?
Cobra2 said:Sockets / cages for GU50:
Arne K
I mean left one.
What are distances between holes for bolts, and what size of a big hole is needed to mount it?
Re: Chassis?
Hi Bob;
I did not find a manufacturer yet. It seems to be too costly to order them in California.
Any suggestions?
CaliforniaBob said:Wavebourn
Are you ordering chassis just for yourself. Any specs
and/or costs?
I wish to piggyback on your order.
Hi Bob;
I did not find a manufacturer yet. It seems to be too costly to order them in California.
Any suggestions?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- GU-50 100W output and power transformers