This is for the group buy of the Fastron Inductor of JG's filter buffer for ES9022 GB..
For those are interested in matched inductors, please sign up at this spreadsheet.
Thanks,
For those are interested in matched inductors, please sign up at this spreadsheet.
Thanks,
I have a meter and could match these, then send out? I get free mouser shipping if the order is more than €75, but postage from me onwards would have to be figured. I can't add my name right now to the sheet (phone access atm)......
Fran
Would it make sense for Fran to do matching and distribution for the EU members?
I am more than happy if Fran takes over the GB.
FWIW, if I order from Mouser, the sales tax will be around 9% and shipping is around USD 10. The overhead is approx USD 25, spread it across the board will be less than 25 cents per unit. The saving is not likely to be significant one way or the other.
While we are at it, I wonder we should also purchase the remaining parts. I suspect the inductor might be the heaviest single parts ......
FWIW, if I order from Mouser, the sales tax will be around 9% and shipping is around USD 10. The overhead is approx USD 25, spread it across the board will be less than 25 cents per unit. The saving is not likely to be significant one way or the other.
While we are at it, I wonder we should also purchase the remaining parts. I suspect the inductor might be the heaviest single parts ......
Gulp!
I haven't run a group buy before, so might need a little hand holding.... But should be ok. ;-)
Just to add, the lcr meter I have is one of those €40 ones from ebay that salas mentioned in the other thread. I don't know exactly how accurate it is, but repeat measurements show pretty ok precision. I should think that would be ok for matching purposes?
Fran
I haven't run a group buy before, so might need a little hand holding.... But should be ok. ;-)
Just to add, the lcr meter I have is one of those €40 ones from ebay that salas mentioned in the other thread. I don't know exactly how accurate it is, but repeat measurements show pretty ok precision. I should think that would be ok for matching purposes?
Fran
Last edited:
http://www.diyaudio.com/forums/digi...g-new-ess-vout-dac-es9022-26.html#post2862262
"The coil has to be put in a small Mumetall container."
Is there any source for the mu-metal container?
Tat
"The coil has to be put in a small Mumetall container."
Is there any source for the mu-metal container?
Tat
http://www.diyaudio.com/forums/digi...g-new-ess-vout-dac-es9022-26.html#post2862262
"The coil has to be put in a small Mumetall container."
Is there any source for the mu-metal container?
Tat
No need for mumetal sheild, see post #262:
The coil you found is shielded, fine, maybe this is the holy grail .
EUVL has posted a BOM:
http://www.diyaudio.com/forums/grou...hard-filter-buffer-es9022-11.html#post3113690
Would those that have signed up here already be interested in turning this GB into one for the SMD components as well? The only thing is that I think I would need to get all the stuff together from mouser - I don't think digikey does shipping to here?
Fran
http://www.diyaudio.com/forums/grou...hard-filter-buffer-es9022-11.html#post3113690
Would those that have signed up here already be interested in turning this GB into one for the SMD components as well? The only thing is that I think I would need to get all the stuff together from mouser - I don't think digikey does shipping to here?
Fran
EUVL has posted a BOM:
http://www.diyaudio.com/forums/grou...hard-filter-buffer-es9022-11.html#post3113690
Would those that have signed up here already be interested in turning this GB into one for the SMD components as well? The only thing is that I think I would need to get all the stuff together from mouser - I don't think digikey does shipping to here?
Fran
I would certainly be interested in this Fran, thanks.
John
EUVL has posted a BOM:
http://www.diyaudio.com/forums/grou...hard-filter-buffer-es9022-11.html#post3113690
Would those that have signed up here already be interested in turning this GB into one for the SMD components as well? The only thing is that I think I would need to get all the stuff together from mouser - I don't think digikey does shipping to here?
Fran
I will be interested in these too!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Fastron Inductor Group Buy for JG Filter Buffer