Some folks actually understand what i'm saying ?
(coming saturday Ayayayay is cooking for 20, so Maitre-J would be OK. They're all in the Med. bizz, good chance they will all survive, but fingers crossed just the same. Overhere i have the Renfield syndrome for the one and only Masta)
(coming saturday Ayayayay is cooking for 20, so Maitre-J would be OK. They're all in the Med. bizz, good chance they will all survive, but fingers crossed just the same. Overhere i have the Renfield syndrome for the one and only Masta)
jacco vermeulen said:Some folks actually understand what i'm saying ?
(coming saturday Ayayayay is cooking for 20, so Maitre-J would be OK. They're all in the Med. bizz, good chance they will all survive, but fingers crossed just the same. Overhere i have the Renfield syndrome for the one and only Masta)
nah, I couldn't understand you, it was the Tom Waits reference that clued me in
I included the Bruges Carillon poster in the background for you crazy Euros... Next time perhaps I'll include a nice cold Sterkens instead
luvdunhill said:
like dis, ?
Ok, now you've shown us the bypass caps, how about a pic of the power cap bank?
Magura
The irony, a whole lot of power amps used to be built using aluminum panels on steel space-frame works.
Just take the Cello Duet that's in the spot lights again today, for an example.
(but i'm just a drunk, hooked on Tequila and salt, the Mariachi Ayayayay lyrics give me away every time)
Just take the Cello Duet that's in the spot lights again today, for an example.
(but i'm just a drunk, hooked on Tequila and salt, the Mariachi Ayayayay lyrics give me away every time)
jacco vermeulen said:The irony, a whole lot of power amps used to be built using aluminum panels on steel space-frame works.
Just take the Cello Duet that's in the spot lights again today, for an example.
(but i'm just a drunk, hooked on Tequila and salt, the Mariachi Ayayayay lyrics give me away every time)
dang, I could have just used the standoffs as "wires" between the boards. Why didn't you mention this before?
Magura said:
Ok, now you've shown us the bypass caps, how about a pic of the power cap bank?
Magura
just a mere 0.5F of capacitance there.
Heatsink ? for DIY F4XXX
Nelson, (or anyone else that wants to chime in)
You were gracious enough to gift me with 4 F Series heatsinks at BA 07. I will finally have time and money to commence the build this month. I am wondering if I orient all 4 heatsinks 90 degrees from each other for an aleph style enclosure, (with a MUCH different look), will the heatsinking be adequate to include all 4 channels for 2x100w monoblocks inside the same chassis? The PS will be outboard so that I can tap it for any Fx amplifier.
Thank you all for your time,
Chris
p.s. No wisecracks about it not REALLY being monoblocks if they are in the same box. This forum is full of good humor like this.
Nelson, (or anyone else that wants to chime in)
You were gracious enough to gift me with 4 F Series heatsinks at BA 07. I will finally have time and money to commence the build this month. I am wondering if I orient all 4 heatsinks 90 degrees from each other for an aleph style enclosure, (with a MUCH different look), will the heatsinking be adequate to include all 4 channels for 2x100w monoblocks inside the same chassis? The PS will be outboard so that I can tap it for any Fx amplifier.
Thank you all for your time,
Chris
p.s. No wisecracks about it not REALLY being monoblocks if they are in the same box. This forum is full of good humor like this.
Re: Heatsink ? for DIY F4XXX
if not real monoblocks , you'll have one real monobox
chrismercurio said:........
p.s. No wisecracks about it not REALLY being monoblocks if they are in the same box. This forum is full of good humor like this.
if not real monoblocks , you'll have one real monobox
chrismercurio said:Now all we need is Jacco and Magura to add their
Cap bank pic??
Magura
Re: Heatsink ? for DIY F4XXX
Horizontal or vertical fins?
Magura
chrismercurio said:Nelson, (or anyone else that wants to chime in)
You were gracious enough to gift me with 4 F Series heatsinks at BA 07. I will finally have time and money to commence the build this month. I am wondering if I orient all 4 heatsinks 90 degrees from each other for an aleph style enclosure, (with a MUCH different look), will the heatsinking be adequate to include all 4 channels for 2x100w monoblocks inside the same chassis? The PS will be outboard so that I can tap it for any Fx amplifier.
Thank you all for your time,
Chris
Horizontal or vertical fins?
Magura
chrismercurio said:They are F series fins so they are horizontal. It will be a different look.
Well, I wanted to figure, if you meant to make a tall tower.......
Since that's not the case, no problem.
Magura
chrismercurio said:I don't think the tall tower thing would work. Reminds me of Variac's BA project that you helped put together though.
Chris
Exactly! The tall tower thing, will just be waste of good heatsink, as the efficiency decreases dramatically at over 6 inches.
Magura
chrismercurio said:...... Reminds me of Variac's BA project that you helped put together though.
Chris
well - I have another impression - they all were just looking WTF Papa is doing with that amp .......
Zen Mod said:
well - I have another impression - they all were just looking WTF Papa is doing with that amp .......
Well,
I am not rolling on the floor, but that WAS FUNNY!
- Home
- Amplifiers
- Pass Labs
- F4 power amplifier