1)
We have 16 chararcters on any row.
1234567890123456
PCM192KHz -192dB
no space for space
12345678901234567
PCM 192KHz -192dB
you prefer ?
1234567890123456
192KHz -192dB
I think the second one look better (PCM 192KHz -192dB), it is very very rare to use volume lower than -100dB (my system is already almost silent at -70dB).
2)
Not easy maintain both releases % and dB
No problem.
Last edited:
I think the second one look better (PCM 192KHz -192dB), it is very very rare to use volume lower than -100dB (my system is already almost silent at -70dB).
No problem.
The second is too long, see 17 characters
re the DAC kit
Hi Kenneth,
Much much do you want for the kits?
I'll be in Hong Kong towards the end of October.
Allen Wong
Hi Kenneth,
Much much do you want for the kits?
I'll be in Hong Kong towards the end of October.
Allen Wong
Dear All,
I've no time to build this lovely ES9018 DAC, and now I decided to sell the DAC kit.
The kit included the following:~
- Quanghao custom made chassis(defeated due to poor packing, still waiting Quanghao to send me a new facepanel and the sidepanel)
- Gold-plated RCAs, Neutrik XLRs, Toshiba RX147L
- DAC module, remote, display
- I/V module without any opamps
- Amanero USB module
- two custom made toroidal transformer with 220V-0 primary input, a 22VA for digital, and a 50VA for analog
Please PM me if interested.
Best regards,
Kenneth Lau
Hi Kenneth,
Much much do you want for the kits?
I'll be in Hong Kong towards the end of October.
Allen Wong
Hi Allen Wong,
Yes, I'm willing to sell my kit, everything you needed to build the kit is included, I can free you 4pcs OPA2134 that ordered from RS for inital testing.
Just pm for the price details, thanks!
Thanks!
Kenneth Lau
Hi Kenneth,
Much much do you want for the kits?
I'll be in Hong Kong towards the end of October.
Allen Wong
Hi Allen Wong,
Yes, I'm willing to sell my kit, everything you needed to build the kit is included, I can free you 4pcs OPA2134 that ordered from RS for inital testing.
Just pm for the price details, thanks!
Thanks!
Kenneth Lau
Hi Allen Wong,
Yes, I'm willing to sell my kit, everything you needed to build the kit is included, I can free you 4pcs OPA2134 that ordered from RS for inital testing.
Just pm for the price details, thanks!
Thanks!
Kenneth Lau
i will sen to you the front chasssi I had the front. I will send you the front Chassis earliest.
thank you
yes, ok to you one, not worry!"i will sen to you the front chasssi I had the front. I will send you the front Chassis earliest.
thank you "
Hi Quanghao, I am waiting for mind too. Please let me know. Cheers Herbert
thank
1234567890123456
PCM 44KHz -127dB
PCM192KHz -127dB
PCM192KHZ -90dB
See the insistency of sampling rate display on the current firmware. Some with space after PCM, some without.
------------------------------
1234567890123456
PCM 44KHz -127dB
PCM 192KHz-127dB
PCM 192KHZ -90dB
Isn't it look much consistent with this edited sampling rate display?
It can fit within the 16x2 diaplay. No space after KHz when volume is below -100dB is fine, as those occations are rare, but we see the consistent/inconsistent sampling rate display all the time!
Actually all we need is just a one-off 2nd choice firmware for those who need it, no furthur maintenance is needed for this 2nd choice firmware. Is it too much?
Thanks,
PCM 44KHz -127dB
PCM192KHz -127dB
PCM192KHZ -90dB
See the insistency of sampling rate display on the current firmware. Some with space after PCM, some without.
------------------------------
1234567890123456
PCM 44KHz -127dB
PCM 192KHz-127dB
PCM 192KHZ -90dB
Isn't it look much consistent with this edited sampling rate display?
It can fit within the 16x2 diaplay. No space after KHz when volume is below -100dB is fine, as those occations are rare, but we see the consistent/inconsistent sampling rate display all the time!
Actually all we need is just a one-off 2nd choice firmware for those who need it, no furthur maintenance is needed for this 2nd choice firmware. Is it too much?
Thanks,
Last edited:
Making different firmware versions just to display data in a (slightly) different way sounds like an incredible waste of time to me.Is it too much?
I certainly hope Andrea has better things to do.......
Making different firmware versions just to display data in a (slightly) different way sounds like an incredible waste of time to me.
I certainly hope Andrea has better things to do.......
Yes I think you are right about that
This version add only a space in the PCM display
PCM192KHz -> PCM 192KHz
Thanks Andrea for your kind gesture
Hi quanghao,
Any news from my (and the 3 friend's of course) order ?
Any news from my (and the 3 friend's of course) order ?
Hi To day i comeback home from holiday
So , Please you not worry about it,
I need fix some update to you and 3 friend, So it is later!
Please waite me, i will ship some day!
Please waite me!
quanghao
thank many, many
Today, I sent goods to you the following:
1. Claudio52, bill TNT 759693059 ; DAC Finis
2. Smoothquark, bill TNT 759693062 DAC Finis with stanby
3. I2K92, bill TNT 759693076 : kit DAC+ chaissi+ all Jac ((BNC ....)
4. Judo, bill FedEx 803487662855 : Kit DAC+ Transformer
5.Bertchai, bill FedEx 803487662844: Front chassis
6. La1209, bill FedEx 803487662833 : Front chassis+ side edge
There is only one you, I'll send in a few days!
I would like to thank all of you
Quanghao
1. Claudio52, bill TNT 759693059 ; DAC Finis
2. Smoothquark, bill TNT 759693062 DAC Finis with stanby
3. I2K92, bill TNT 759693076 : kit DAC+ chaissi+ all Jac ((BNC ....)
4. Judo, bill FedEx 803487662855 : Kit DAC+ Transformer
5.Bertchai, bill FedEx 803487662844: Front chassis
6. La1209, bill FedEx 803487662833 : Front chassis+ side edge
There is only one you, I'll send in a few days!
I would like to thank all of you
Quanghao
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Quanghao Audio Design
- DAC-END R (ES9018) full assembled board