yes, its a mistake that 0.25W has crept up in the sch for R2, I used a 3W part, 750V part.
PR03000201004JAC00 Vishay / BC Components | Mouser India
PR03000201004JAC00 Vishay / BC Components | Mouser India
Are the diode bypass caps necessary when using MUR860? I am thinking no
Does anyone have a part number for the heatsinks that would work with the TO-220 MUR860 rectifier diodes?
I also kind of wonder if I need heatsinks for this supply as it is only drawing 100mA (phono PSU).
Does anyone have a part number for the heatsinks that would work with the TO-220 MUR860 rectifier diodes?
I also kind of wonder if I need heatsinks for this supply as it is only drawing 100mA (phono PSU).
Are the diode bypass caps necessary when using MUR860? I am thinking no
Does anyone have a part number for the heatsinks that would work with the TO-220 MUR860 rectifier diodes?
I also kind of wonder if I need heatsinks for this supply as it is only drawing 100mA (phono PSU).
This will be too big a crc psu for 100mA. you can design something smaller with regulators. i have a to-220 rectifiers + crc+lm317/337 psu pcb if you need it, quite small.
Hello all,
I have 20 nos. of CRC PSU PCBs left in my stock. I want to get rid of the stock and hence selling at discounted prices. original price was usd 6.5 a piece.
I am offering it at usd 4 a piece.
if anyone wants a few, please share your paypal email, postal address with me via PM.
regards
prasi
I need to make provision for buying v-fet lottery amp kit
I have 20 nos. of CRC PSU PCBs left in my stock. I want to get rid of the stock and hence selling at discounted prices. original price was usd 6.5 a piece.
I am offering it at usd 4 a piece.
if anyone wants a few, please share your paypal email, postal address with me via PM.
regards
prasi
I need to make provision for buying v-fet lottery amp kit
Hi all,
I have the CRCRC almost done, but I can't decide what size filter capacitors to buy.
6x 10 000 uF
6x 15000 uF
6x 18000 uF
6x 22000 uF
I will power one board with 2pcs JAT501 (100W/ 4ohm). I will use 400W toroidal transformer, common for both channels
Thx.
I have the CRCRC almost done, but I can't decide what size filter capacitors to buy.
6x 10 000 uF
6x 15000 uF
6x 18000 uF
6x 22000 uF
I will power one board with 2pcs JAT501 (100W/ 4ohm). I will use 400W toroidal transformer, common for both channels
Thx.
Attachments
- Home
- Group Buys
- CRC Power Supply (Class A amplifier)