steenoe said:Looking at your psu, you mean to use a 9mH?? That is gonna be one big darn mother######! You do know, that you are supposed to use aircore inductors right?
Steen
if you have some wire and few old small xformers,I'll send you or ,even better ,post here exactly how my chokes are made......
on monday,when I will have time to measure exact dimensions
you'll be surprised how small they are
hehe
that you are supposed to use aircore inductors
why?
Saturation?why?
More ugly hardware I have 2 big aircore inductors 2mH each, 4 pcs 100000uF's and a 625VA trafo for the psu.
Steen
Attachments
steenoe said:Saturation?
Steen
you know how Papa's laugh sounds?
something as muahahahahahahaaaaaaaaaaaaaaa!!!!!
More ugly hardware
yup!
I have 2 big aircore inductors 2mH each
good ;
4 pcs 100000uF's
I hate ya!
625VA trafo
sisyyyyyyyy.
weak
schlach
so-I'm back from little familly trip;tomorrow I'll write here some data for my chokes,even if yours will be more than enough in combination with those megazilionfarad caps
steenoe said:I am multitasking my queue right now Here is my Babelfish chassis in the making, I had those 3 nice fat heatsink's lying around and bolted them together to make a "sort of" old style Aleph chassis.
Steen
look at sketch
wooden corners
nice touch
Attachments
What the hell amount of RCAs . . .
What the white fat caps . . .
What the wounded coils . . .
Choky,
Thanks for the 1237.
I also see Zeny V2 in the file you attached.
Ah, my current one is somewhat different from V2, having voltage gain adjustment . . . which I am using also as a preamp driving Zen V5. Are you intested in . . . quietly?
What the white fat caps . . .
What the wounded coils . . .
Choky,
Thanks for the 1237.
I also see Zeny V2 in the file you attached.
Ah, my current one is somewhat different from V2, having voltage gain adjustment . . . which I am using also as a preamp driving Zen V5. Are you intested in . . . quietly?
I needed 17 pairs to shine up the Threshold NS10..What the hell amount of RCAs . . .
Thats a lot, but looks great now that they are mounted. All new and gold shining
Steen
Babowana said:................
Choky,.............
I also see Zeny V2 in the file you attached.
Ah, my current one is somewhat different from V2, having voltage gain adjustment . . . which I am using also as a preamp driving Zen V5. Are you intested in . . . quietly?
Babo-my brain is on sorta red now.....can you explain that little further?
which file?
Babowana said:I see two file folders, named:
1 . .
2 Zastita zvucnika...
Under the first floder, all garbage except Zeny V2
hahahahaha or "muahahahahahahaha"..........!
it's when you open it with RAR,not decompressing it before?
right?
if -yes- than 1 .. is garbage from RAR Temp folder in YOUR comp,not mine
just checked in my "sent" folder-I sent you just "zastita zvucnika" rar-ed.
Zen Mod said:hahahahaha or "muahahahahahahaha"..........!
i know i don't know computer . . .
Laugh till you're tired . . .
Re: J-Fet
it's easier for you to buy from Borbely
Michael Mik said:Can anybody sell me 4 or 6 times the J109 dual Fet, required for the babbelfish, going to Germany, payable via PayPal
it's easier for you to buy from Borbely
steenoe said:More progres I couldnt fit wooden corners, because the aluplates would become too small. I had them cut allready.
Boards are drilled and polished and about to be stuffed
Steen
gimme pic of populated boards,and just then I'll tell "ugly!"
Mod'y, take a look at this:http://www.diyaudio.com/forums/showthread.php?postid=1068284#post1068284
Steen
Steen
steenoe said:Mod'y, take a look at this:http://www.diyaudio.com/forums/showthread.php?postid=1068284#post1068284
Steen
hehe
I would not..........
What about a pic of the finished amp, will that do? The reading on the meter is DC offset at the speaker-terminals Pretty nice, dont you think? I think this amp IS a bit sexy looking for a change I will keep you updated with more pic's and not the least, listenig impressions if it doesnt go up in smoke, before I get a chance to connect speakersgimme pic of populated boards,and just then I'll tell "ugly!"
Steen
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- Babbelfish J PCBs