Please put your name is here https://docs.google.com/spreadsheet...U0MzZl9fX0xWZ28wNlFwU2RNTnc&usp=sharing#gid=0
Hi all
For those interested, I've got some assembled & tested version available:
1° - V3 Beta with I2S/UFL pads (no UFL soldered) + SPDIF section populated + PSU (220v)
2° - V3 board with BlackGate (F) 10uF at C21 (mods included) + PSU (220v)
3° - V2.6 board with BlackGate (F) 10uF at C21 (V3 mods included) + PSU (220v)
PM for details
-> I've asked Subbu & Jean-Paul for a second run, waiting for their answer.
Regards
Phil
For those interested, I've got some assembled & tested version available:
1° - V3 Beta with I2S/UFL pads (no UFL soldered) + SPDIF section populated + PSU (220v)
2° - V3 board with BlackGate (F) 10uF at C21 (mods included) + PSU (220v)
3° - V2.6 board with BlackGate (F) 10uF at C21 (V3 mods included) + PSU (220v)
PM for details
-> I've asked Subbu & Jean-Paul for a second run, waiting for their answer.
Regards
Phil
I correct my mistake . Sorry it's my first post in this forum. But I already stand many hours reading lot of threads in this fantastic forum. This is like a bible, most of the time you don't need to ask something but just search for the answer.
I was searching for a diy DAC at low price since few month. I think I find exactly what I want.
A simple question, if I want to put an USB input, I just have to find a USB to spdif converter?
I was searching for a diy DAC at low price since few month. I think I find exactly what I want.
A simple question, if I want to put an USB input, I just have to find a USB to spdif converter?
Last edited:
A simple question, if I want to put an USB input, I just have to find a USB to spdif converter?
Hi jacorius,
You need : 1 x USB to I2S stick (i.e Amanero) + connect the 3 x I2S wires form the USB stick to the DAC board & Gnd (S/G/S/G/S/G).
FYI : I've got a fully assembled/tested V3 "Beta" PCB with UFL pads for I2S stream + 1 x Amanero Isolator assembled/tested.
Regards
Phil
Last edited:
Hi jacorius,
You need : 1 x USB to I2S stick (i.e Amanero) + connect the 3 x I2S wires form the USB stick to the DAC board & Gnd (S/G/S/G/S/G).
FYI : I've got a fully assembled/tested V3 "Beta" PCB with UFL pads for I2S stream + 1 x Amanero Isolator assembled/tested.
Regards
Phil
Thank you for your answer. I was not sure it was possible from I2S sources like amanero.
Last edited:
Hi
I've got informations from Subbu.
PCBs are available in limited quantity : 50 units of each DAC & PSU.
DAC PCB are pre or final version (Q2 footprint differs and some marking too).
Prices will be slightly higher vs previous GB.
So, I'll link in the afternoon a Google request form for orders.
Regards
Phil
I've got informations from Subbu.
PCBs are available in limited quantity : 50 units of each DAC & PSU.
DAC PCB are pre or final version (Q2 footprint differs and some marking too).
Prices will be slightly higher vs previous GB.
So, I'll link in the afternoon a Google request form for orders.
Regards
Phil
Link to Google Order form :
https://docs.google.com/forms/d/17NVapTxD83vWXvx3OXpxgc-gJxTpLAt7SqwKMc7_zY8/viewform?usp=send_form
Parts are "Premium", they are selected according to DIYer's experience :
http://www.diyaudio.com/forums/digital-line-level/246003-modifying-subbu-v3-dac.html
C17 - 1uf X7R MLCC Ceramic capacitor
C22 - 470uf 6.3v Panasonic SEPC 6SEPC470
C32 - 1uf Wima MKS2 (LS 2.5mm)
C4 - 1uf Wima MKS2 (LS 5mm)
C8/13/21 - 10uF/25V Panasonic SEPM (Polymer)
I'll add tomorrow another link for those who want Assembly Service.
Quantity is limited to 50 units of each PCB.
Regards
Phil
https://docs.google.com/forms/d/17NVapTxD83vWXvx3OXpxgc-gJxTpLAt7SqwKMc7_zY8/viewform?usp=send_form
Parts are "Premium", they are selected according to DIYer's experience :
http://www.diyaudio.com/forums/digital-line-level/246003-modifying-subbu-v3-dac.html
C17 - 1uf X7R MLCC Ceramic capacitor
C22 - 470uf 6.3v Panasonic SEPC 6SEPC470
C32 - 1uf Wima MKS2 (LS 2.5mm)
C4 - 1uf Wima MKS2 (LS 5mm)
C8/13/21 - 10uF/25V Panasonic SEPM (Polymer)
I'll add tomorrow another link for those who want Assembly Service.
Quantity is limited to 50 units of each PCB.
Regards
Phil
Hi all
Here's the link for Assembly Service :
https://docs.google.com/forms/d/1d_4HKu055NhdmI5D04ENQAHSn4TE2DXc-WuZ9_1vomM/viewform?usp=send_form
Each unit is handmade by myself and tested before shipping.
Tranformer cost is included when you order a built PSU (110 or 220V).
Reminder : Quantity is limited to 50 units of each PCB, Subbu DAC V3 & PSU V3.
My goal is to ship before Christmass
Regards
Phil
Here's the link for Assembly Service :
https://docs.google.com/forms/d/1d_4HKu055NhdmI5D04ENQAHSn4TE2DXc-WuZ9_1vomM/viewform?usp=send_form
Each unit is handmade by myself and tested before shipping.
Tranformer cost is included when you order a built PSU (110 or 220V).
Reminder : Quantity is limited to 50 units of each PCB, Subbu DAC V3 & PSU V3.
My goal is to ship before Christmass
Regards
Phil
Last edited:
Hi All
@northernsky : Yes, next step is Paypal.
Phil
Shall I wait for a bill?
northernsky
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- ES9023 / WM8804 S/PDIF "Subbu DAC V3" GB Interest