I'm building these cabs for a 8" driver. I have a pair that I want to try. I also think these might be nice for the BetsyK. They are 2cuft resonant cabs. I'll try the BestyK's as soon as I get some. This configuration should be very SET low watt/ volume friendly.
Attachments
Last edited:
Here you go, hope this helps
Thanks for the measurement. Looks like I would have to enlarge the hole.
Better than having to make it smaller.
I agree with you!
It’s only 1/4” to small so 1/8” on each side.
My measurements are for Betsy K, not sure if regular Betsy is the same.
You could wait for Randy to confirm everything.
1/8" each side might not make a difference.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- Wild Burro Audio
- ALTEC 618 CABS