cu6apum: driver for BBB is open source (I'm the author), but not (yet) in the mainline
Oh, i must have missed an important thing. Thank you for this titanic work miero!!
Volumio 2 on BBB
Hi guys! Try my work GitHub - Tigor888/Volumio_BBB: Volumio on BeagleBoneBlack. This make work Image !!!
This makes a completely working image for the BBB.
Also added: Access Point on RTL8188 and RTL8192 chipset, Small SPI display 320X480 and resistive touchpad, Lirc_BBB,
and more..
Hi guys! Try my work GitHub - Tigor888/Volumio_BBB: Volumio on BeagleBoneBlack. This make work Image !!!
This makes a completely working image for the BBB.
Also added: Access Point on RTL8188 and RTL8192 chipset, Small SPI display 320X480 and resistive touchpad, Lirc_BBB,
and more..
I am definitely still open to using the BBB.
I did use it with volumio for a while, but they were not supporting I2S out at the time. I will check again.
What's great is that even though the rpi may seem humble, it actually makes a really good streaming appliance! I am actually quite impressed. It easily beats a Squeezebox etc...
I will let you know what I find with the BBB
Russ, is it possible to use RP3 B+ with hermes/cronus combination as an isolator/reclocker? or is that even needed? I tried connecting my rp3 b+ directly into the dac via otto (i2s) using moode as a player, but it would not lock. However, I have a kali recloker, and if I use that, it locks. Maybe moode is not designed to be connected directly? Anyway, what I wanted to do is use hermes/cronus instead of kali as a recloker. Is this even posssible?
Alex
Infineon has an amplifier HAT ZW for the RPi Zero W. It is a 40W amp (Kit_40W_AMP_HAT_ZW) that makes a great active speaker conversion for an old outdoor speaker like the SONOS V first version. I am using it as an endpoint in ROON. I am trying to figure out how to make it into a mono setup so I can have a right channel and left channel.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.