.
hi, not much to comment really
Whether you use it for SPICE MODEL testing or
Build Something like it for your REAL MOSFET tests.
Gives
Voltage GATE-SOURCE ( VGS ) for a specific DRAIN CURRENT ( ID )
And for both the NMOS and the PMOS transistor.
Perfect for see approximately what values your transistors will have
at an idle Current in your PUSH-PULL Output Stage.
This setup used 5 Ampere and 20 Volt DRAIN-SOURCE.
So this is something what these EXICON Lateral
will have for VGS at 100 Watt per devices!
Lineup
hi, not much to comment really
Whether you use it for SPICE MODEL testing or
Build Something like it for your REAL MOSFET tests.
Gives
Voltage GATE-SOURCE ( VGS ) for a specific DRAIN CURRENT ( ID )
And for both the NMOS and the PMOS transistor.
Perfect for see approximately what values your transistors will have
at an idle Current in your PUSH-PULL Output Stage.
This setup used 5 Ampere and 20 Volt DRAIN-SOURCE.
So this is something what these EXICON Lateral
will have for VGS at 100 Watt per devices!
Lineup
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.