Hi
Due to moving house & too many project I'm selling parts from hesener GB :
- 4 Paradise PCB : 120x214mm, red colour, silver finish, white component print
- 4 Heatsinks + mounting clips for heatsinks
- 2 Antek Transformers AN0220 25VA/2x20V : Antek - AN-0220
Original cost is 58€ for a set of 2 PCB + 2 heatsink + clips + shipping
I've paid 40€ for 2 Antek AN0220 shipped.
Asking 160€ for all above parts - Paypal only + fees + shipping
Phil
Due to moving house & too many project I'm selling parts from hesener GB :
- 4 Paradise PCB : 120x214mm, red colour, silver finish, white component print
- 4 Heatsinks + mounting clips for heatsinks
- 2 Antek Transformers AN0220 25VA/2x20V : Antek - AN-0220
Original cost is 58€ for a set of 2 PCB + 2 heatsink + clips + shipping
I've paid 40€ for 2 Antek AN0220 shipped.
Asking 160€ for all above parts - Paypal only + fees + shipping
Phil
Last edited:
The Paradise is MC only...
stereo phono MM right?
Really? I was pointed at this design and wanted to show interest before someone else took the boards. Unfortunately I missed out on the fact that it was MC optimized.
In other words; crap!
Is there another big/awesome/lots-of-parts design going round for a MM? I am new to TT's so I am not familiar to the TT-topics :0
In other words; crap!
Is there another big/awesome/lots-of-parts design going round for a MM? I am new to TT's so I am not familiar to the TT-topics :0
Really? I was pointed at this design and wanted to show interest before someone else took the boards. Unfortunately I missed out on the fact that it was MC optimized.
In other words; crap!
Is there another big/awesome/lots-of-parts design going round for a MM? I am new to TT's so I am not familiar to the TT-topics :0
Go here and ask Salas for Simplistic NJFET RIAA both MM & MC: http://www.diyaudio.com/forums/analogue-source/129126-simplistic-njfet-riaa.html
Where's the "extravaganza" in that? I can just as well etch the LME49990-layout I had planned to built before someone pointed me at the Paradise R3.Go here and ask Salas for Simplistic NJFET RIAA both MM & MC: http://www.diyaudio.com/forums/analogue-source/129126-simplistic-njfet-riaa.html
Where's the "extravaganza" in that? I can just as well etch the LME49990-layout I had planned to built before someone pointed me at the Paradise R3.
You want the Pearl II.
Hi All
Finally I've got my ADSL line Ok
All parts have been sold, thanks to buyers.
I've added a tracking Number for Nikolas and Bernd (free for you)
Nikolas : LE015563440FR
Bernd : LE015563317FR
You can check your parcel delivry here : La Poste - suivi du courrier international - Accueil
From what I could read, Nikolas has been delivered.
Thanks
Phil (korben69)
Finally I've got my ADSL line Ok
All parts have been sold, thanks to buyers.
I've added a tracking Number for Nikolas and Bernd (free for you)
Nikolas : LE015563440FR
Bernd : LE015563317FR
You can check your parcel delivry here : La Poste - suivi du courrier international - Accueil
From what I could read, Nikolas has been delivered.
Thanks
Phil (korben69)
HeheWhere's the "extravaganza" in that? I can just as well etch the LME49990-layout I had planned to built before someone pointed me at the Paradise R3.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.