Hi guys.
My CD Recorder Pioneer stopped working.
After disassembled it, I found that the laser lens rolled into the box.
Obviously fallen during transport.
Is it possible to fix with glue or something more is needed?
Cheers
My CD Recorder Pioneer stopped working.
After disassembled it, I found that the laser lens rolled into the box.
Obviously fallen during transport.
Is it possible to fix with glue or something more is needed?
Cheers
Attachments
You should be able to see exactly where it came from and what orientation. This is critical so as not to need to physically adjust the Laser Grating.
I wouldn't use Super-Glue. It has a tendency to make the Lens go 'cloudy'.
Some other Glue should work.
But I cannot stress enough about getting it back in exactly the same orienation as it came from.
P.
I wouldn't use Super-Glue. It has a tendency to make the Lens go 'cloudy'.
Some other Glue should work.
But I cannot stress enough about getting it back in exactly the same orienation as it came from.
P.
I've never seen that happen in all the countless players we used to service.
Worked for a Pioneer ASC for 25 years, saw loads of this, but not so much on the Recorders.
Mainly on the PEA-1030 Laser. Notorious for it.
P.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Source & Line
- Digital Source
- Fell lens